IQ Gateway software version 7.6.336 supports IQ7 Series and M Series Microinverters along with IQ Battery 3T/10T and AC Battery for Germany, Belgium, Austria, France, Netherlands, and Switzerland.

• Gateways supported: IQ Gateway Metered
• Countries:  Austria, Belgium, France, Germany, Netherlands, Switzerland
• Microinverters supported: IQ7 Series, M Series, third-party string inverters
• Batteries supported: IQ Battery 3T/10T, AC Battery

• Supported system configurations:

  • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
  • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
  • Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
  • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Battery
  • Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and AC Battery

  #	Feature	Description
  1	Bug fixes	Fixes the issue of multiple USB unplugged events observed in the Enphase Installer Portal. Fixes the issue of microinverters, batteries, and other devices not reporting status by improving the Zigbee communication. Fixes the issue of the Battery Management Unit (BMU) shutting down whenever the IQ battery is idle. Fixes the issue of undesirable power consumption (tare loss) by the battery when in idle state. Fixes the issue of IQ Battery maximum state-of-charge (SoC) being limited to 97% instead of 100%. Fixes the issue of Phase Imbalance Management (PIM) getting enabled for single-phase systems.

   

  This release is being deployed via remote software upgrades for all systems.