Solar Calculator, Compatibility Calculator | Support | Enphase

Module Compatibility Calculator

Use this calculator to help determine the electrical compatibility of PV modules with the Enphase microinverter family. Refer to the PV module manufacturer's datasheet for correct values. All fields are required.

Module Compatibility Results

Solar Module Information

Voc (Voltage at Open Circuit)

The Voc is the voltage that is read with a voltmeter or multimeter when the module is not connected to any load.

V

Please provide a valid number.

Vmp (Voltage at Maximum Power)

The Vmp is the voltage that is read with a voltmeter or multimeter when the module is producing maximum power.

V

Please provide a valid number.

Temperature Coefficient of Voc

Coefficient used to determine effect of temperature on a PV module's open circuit voltage. Contact your manufacturer if this value is not listed on the datasheet.

-

Please provide a valid number.

Isc (Short Circuit Current)

This is the amount of current that flows through the electrical leads when shorted--essentially the maximum amount of current that the PV module can source.

A

Please provide a valid number.

Expected temperature range

Enter the LOWEST daytime temperature and the highest AVERAGE temperature when sunlight will be on the array. Refer the Tech Brief for Expected temperature range in Australia by clicking here.

record low

record high

Please provide a valid number.

I acknowledge that Enphase Energy is not responsible for my use of the data provided herein.

Please check the box above.

Compatibility Results

Array

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

M215

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

M250

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ 6

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ 6+

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ 7

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ 7+

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ 7X

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

IQ7A

Voc - min temp

Voc - max temp

Vmp - min temp

Vmp - max temp

Isc

Notice

The Enphase microinverter family can be paired with 60-cell / 120-half-cell and 72-cell / 144-half-cell modules that match appropriate specifications. Do not connect an Enphase microinverter to a module that the calculator indicates is incompatible. A module should not exceed the maximum input DC voltage of the specific Enphase microinverter model or the maximum current. Doing so may void the warranty. Refer to microinverter datasheet information provided on the product page.. The compatibility calculator does not take into account performance considerations such as PV DC/INVERTER AC ratio which should be considered the system designer.