Find the right fit

Use this compatibility calculator to help determine the electrical compatibility of PV modules with the Enphase IQ Microinverter family.

Print results

Print in landscape orientation for best results.

Temperature range
Enter the LOWEST daytime temperature and the highest AVERAGE temperature when sunlight will be on the array. The ASHRAE Handbook is the recommended source for weather data in a particular location or you can look up the Extreme Low temperatures for your location by clicking here.
Please fill in the temperature range from low to high
Please fill in all required data.
Temperature range
Enter the LOWEST daytime temperature and the highest AVERAGE temperature when sunlight will be on the array. The ASHRAE Handbook is the recommended source for weather data in a particular location or you can look up the Extreme Low temperatures for your location by clicking here.
Please fill in the temperature range from low to high
Please fill in all required data.
  • Compatible
  • Not compatible
Add module
Start the calculation
Select brand
Select model
Temperature range
Enter the LOWEST daytime temperature and the highest AVERAGE temperature when sunlight will be on the array. The ASHRAE Handbook is the recommended source for weather data in a particular location or you can look up the Extreme Low temperatures for your location by clicking here.
Please fill in the temperature range from low to high
Please fill in all required data.
V
V
A
A
Add and calculate
Please fill in all required data.
Calculate
Notice

Please acknowledge that Enphase Energy is not responsible for my use of the data provided herein.

The Enphase microinverter family can be paired with 60-cell and 72-cell PV modules that match appropriate specifications. Modules paired with Enphase microinverters with Integrated Ground must use PV Wire or PV Cable that is compliant with NEC 690.35(D) for Ungrounded PV Power Systems. When using this solar panel calculator, do not connect an Enphase microinverter to a module that the calculator indicates is incompatible. A module should not exceed the maximum input DC voltage of the specific Enphase microinverter model, the datasheet information for which is provided enphase.com/en-us/support. Doing so may void the warranty.

V1-IN-EN-05-22