Obtaining your Enphase Storage Installation Certification through Enphase University is a mandatory prerequisite to install and commission the IQ Battery 5P in India. Be sure to read the guidelines for your first installation. In addition, you need to have a design review performed by Enphase prior to your first installation.

How do I purchase an IQ Battery 5P?

Installers can purchase an IQ Battery 5P from a local Enphase distribution partner. Visit the how to buy page to find a local distributor.

What type of loads can be connected to the system for backup, and how do I connect them?

Only single-phase 230 V L-N loads can be supported for backup with the Enphase Energy System.

Only backup loads from the L1 (A) phase can be supported. Loads from the L2 and L3 phases cannot currently be supported. Refer to the IQ System Controller 3 INT quick install guide for more details on where to connect the load circuits.

Commissioning a system with the Enphase Installer App

This detailed document provides step-by-step instructions for commissioning Enphase Energy Systems with storage using the Enphase Installer App.

How can I minimize my dependence on the utility grid in the Savings profile?

In the IQ Battery 5P Lifting Handles box, I found two handles. Are they interchangeable?

No. The handles are designed to fit onto the left and the right side of the battery, and need to be fitted that way due to the plunger that provides additional security during lifting.

Do I need to order one IQ Battery 5P Lifting Handles set per battery?

No, the IQ Battery 5P Lifting Handles are reusable. You only need one set, and it can be used on multiple installations and for multiple batteries.

Do I need an IQ Battery 5P Pedestal Mount on every site?

No, you only need a pedestal mount on sites where you want to floor-mount an IQ Battery 5P.

Best practices for using your IQ Batteries during a grid outage

Which system profile should I choose for my Enphase Energy System?

When will my Enphase Energy System go off-grid?

How can I add users and provide them with access to view my system performance?

How to change the battery shutdown level in the Enphase App