Apps and software

What’s new 

For Enphase App users with IQ Battery in UK and Spain 

1. Advanced Battery Scheduling

   Introduced multiple time windows to schedule battery charging and discharging, with the option to restrict discharge during selected periods.

   

What’s New?

For all Enphase App users in US:

1. Deals Page (Beta Release)

   Introduced the Deals Page: a new feature offering curated, limited-time deals on select products, available for direct purchase from your phone. This feature will be slowly rolled out to users.

   Navigate to Menu > Deals to check it out.

What’s new

For all installers:

1. Added an additional option for users to sign in via code

   The users shall now be able to sign in to the Enphase Installer Portal using a six-digit code sent to their registered email and phone number.

   
   Users shall see an option to Sign in via code

   
   Users shall provide the registered email address

   
   A 6-digit code shall be sent to the users

   
   Users shall input the 6-digit code

What’s fixed

1. Fixed the issue of the EV Charger option not being visible under Notification Preferences Settings.

What’s new

For all Enphase App users:

1. Option for users to Sign in via code

   Introduced an alternate way to sign in using a six-digit code sent to email and mobile.

   

2. Back button enhancement

   Updated back navigation area to make both the arrow and page title clickable.

   

For Enphase App users with NEM 3.0 (Net Billing Tariff) in California

1. Site details for multi-gateway NEM 3.0 sites

   Added Connection Year and Battery Mode in Site Details page for multi-gateway systems.

   

For Enphase App users with IQ EV Chargers:

1. Reconfigure Wi-Fi option shown upfront for offline chargers

   Added Reconfigure Wi-Fi option to the STATUS page when the charger goes offline.

For Enphase App users with IQ EV Chargers in Europe:

1. New IQ EV Charger status: Session terminated

   New status Session Terminated added—triggered when a charging session ends using the same RFID card that was used to start it.

For Enphase App users with IQ PowerPack 1500:

1. Event History update

   Added PV Overcurrent alerts in app notifications and Event History.

IQ Gateway software version 8.3.5052 supports the commissioning of grid-tied systems with IQ8 Series Microinverters, IQ7 Series Microinverters, a mix of IQ7 and IQ8 Series Microinverters and third-party string inverters, along with the IQ Battery 3T/10T or IQ Battery 5P or IQ Battery 5P with FlexPhase.

 
Countries: Austria, Belgium, Croatia, Denmark, France, Greece, Germany, Great Britain, Italy, Luxembourg, Netherlands, Poland, Spain, Portugal, Switzerland, Sweden, and Slovenia

• Gateways supported:
   
  • IQ Gateway Metered
• Microinverters supported:
   
  • IQ8 Series and IQ7 Series Microinverters
• Batteries supported:
   
  • IQ Battery 5P with FlexPhase
  • Battery 5P
  • IQ Battery 3T/10T
• Supported system configurations:
  • Austria, Croatia, France, Germany, Great Britain, Italy, Luxembourg, Netherlands, Poland, Spain, Portugal, Switzerland, and Slovenia
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P with FlexPhase
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P with FlexPhase
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P with FlexPhase
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P with FlexPhase
    • Grid-tied solar and storage systems with mixed IQ7 and IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P with FlexPhase in Germany, Austria, Switzerland, and Luxembourg
  • Belgium, France, Great Britain, Italy, Luxembourg, and Netherlands
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with mixed IQ7 and IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
  • Austria, Switzerland, Germany, France, Belgium, Netherlands, Spain, Portugal, Denmark, Sweden, and Greece
    • Grid-tied solar and storage systems with mixed IQ7 and IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar-only systems with mixed IQ7 and IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard

This release deploys via the Enphase Installer App.

What’s new

For IQ EV Charger users in Europe:

1. Added the option to cancel pending changes in Charging Modes.

What’s fixed

1. [For IQ EV Charger users] Fixed an issue where charging data wasn’t showing on a few EV charger-only sites.
2. [For IQ EV Charger users in U.S. and Canada] Fixed an issue that prevented EV charging on a few IQ EV Charger-only sites while Storm Alert was on.
3. [For IQ EV Charger users in U.S. and Canada] Fixed an issue that prevented users from disabling Storm Guard on few IQ EV Charger-only sites.
    

What’s new

For all installers:

1. Added additional noise types under PLC Noise Detection

   The users shall now be able to view the following types of PLC noise under the PLC Noise Detection tab in the system dashboard:

   • Idle
   • Transmitted
   • Received (Default)
   • Now

   

What’s New 

For all Enphase App users: 

1. Profile icon enhanced on STATUS page:

   Enhanced the PROFILE change option on the STATUS page.

   

For Enphase App users with IQ PowerPack 1500:

1. Low battery events available in Event History and Push Notification

   Added option to view low battery information in Event History and receive push notifications on demand.

What’s fixed

1. Resolved issues affecting telemetry data accuracy.
2. Fixed the issue where Microinverters Not Reporting status is displayed even when they are reporting.
3. Improved password change flow on My Information page to clearly show errors and prevent confusion or loading issues.
4. Resolved Live Status access over Connect Locally on secondary gateways in multi-gateway sites with batteries.
5. [For IQ PowerPack 1500 users] Fixed an issue where wrong date was displayed in Status page.
6. [For IQ PowerPack 1500 users] Fixed an issue where updated site name wasn’t shown on Live Vitals page in offline (BLE) mode.
7. [For IQ PowerPack 1500 users] Resolved display issues in dark mode.

What’s new

For Enphase App users with IQ PowerPack 1500:

1. Event History updates

   Added new events and updated existing ones in the Events History.

What’s fixed

1. [For IQ PowerPack 1500 users] Fixed an issue where the device was not updating during SyncPulse.
2. [For Electric Water Heater users in France] Updated the power rating limit from 10 kW to 20 kW and the capacity limit from 500 L to 1,000 L.
3. [For Electric Water Heater users in France] Fixed an issue where the HEAT NOW button was shown even when the water heater was running. 

What’s New 

For IQ EV Charger users in Europe 

1. Full Backup support for IQ EV Chargers

   Added support for selecting all Charging Modes under the Full Backup profile. 

   

2. Default Charging Modes for different profiles

   Updated default Charging Modes for IQ EV Chargers: Green Charging for Self-Consumption and Full Backup, Smart Charging for AI Optimization.

3. Authentication details in EV charger sessions report

   Added Authentication details in EV charger sessions report to indicate how each session was authenticated. 

   

What’s Fixed

1. Fixed an issue where the Custom Energy page was not loading for some users.
2. Resolved a date selection issue on the Custom Energy page for older iOS versions.
3. Fixed an issue where signal strength was incorrectly shown as zero for older microinverters on the Array page.
4. Resolved display issues on the Menu page in dark mode for Samsung S25 users.
5. Fixed an issue where a few users were unable to change their system profile settings.
6. [For IQ EV Charger users] Fixed an issue that caused an incorrect Not Charging reason to appear on the Status page. 
    

What’s Fixed

[For IQ PowerPack 1500 users] Fixed an issue where users in Puerto Rico were unable to complete registration due to address validation errors.

What’s new

For all installers:

1. Added microinverter and battery microinverter model number to Grid Profile Settings report

   The users shall now be able to view the following additional information in the Grid Profile Settings report under the Reports tab:

   • For Microinverters:
      
     • Model Number
   • For Battery Microinverters:
      
     • Model Number
     • IQ Battery Serial Number

   

   

2. Added more noise types as part of the PLC noise graphs

   To help users assess whether a site needs a noise filter or not, the following types of PLC noise shall be visible to the users under the PLC Noise Detection tab of the System Dashboard:

   • Idle
   • Transmitted
   • Received
   • Now

   

What’s fixed

1. Fixed the issue of users being unable to raise another request for the Transfer of Ownership if a payment failed.
2. Resolved the issue of the user’s last preference not being honored for the Systems view.
3. Fixed the issue of Signal Strength, which was incorrectly shown as zero for older microinverters on the Array View tab and Array Builder.

What’s Fixed

For Enphase App users in France with Electric Water Heater

The Electric Water Heater (EWH) integrates seamlessly with the IQ Energy Router, enabling real-time monitoring, smart control and optimization of water heater based on energy availability and cost.

1. Enhanced monitoring and control: 
    
   • Real-time monitoring of energy consumption and heating status via Live Status and Live Vitals features.
   • Detailed telemetry and historical data for better insights into energy usage and savings on the Energy Page.
   • Electric Water Heater device details on the Devices page.

   • Heat Now option on Status and Live Status page for immediate heating.

      

     

2. Energy optimization and advanced controls
    
   • Water heater consumption aligns with active profile (AI Optimization or Self Consumption) with various heating mode settings:
   • Green Heating: Utilizes excess solar power to heat water, reducing grid dependency.
   • Smart Heating: Optimizes heating schedules based on dynamic tariffs and energy consumption patterns.

   • Scheduled Heating: Allows users to set custom heating schedules, including off-peak times to minimize costs.

     

      

     

What’s Fixed

For all Enphase App users:

1. Simplified access to cookie preferences.

What’s Fixed

1. [For IQ EV Charger users] Fixed the issue that prevented creating a new IQ EV Charger only site.

What’s new

For all Enphase App users:

1. Opt-out for critical alerts:

   Added OPT OUT for critical storm alerts as well.

   

For IQ EV Charger users in NA and EU:

1. Enhanced IQ EV Charger connectivity flow:

   Enhanced IQ EV Charger Wi-Fi configuration to show a warning for weak connections.

   

For IQ EV Charger users in Europe:

1. Charging schedule now available on STATUS page:

   Added charging schedule details on STATUS page when the IQ EV Charger is set to Smart Charging mode.

   

What’s Fixed

• Optimized the notification delivery time for critical system updates.
• Fixed blank STATUS page when the gateway hasn’t reported for a few hours.
• Resolved the issue of the Environment card showing zero value for non-English locales.
• [For IQ PowerPack 1500 users] Resolved discrepancy between slider values in the app and the device LCD for “Power Save After” and “Power Off After” settings.
• [For IQ PowerPack 1500 users] Added a cancel button in the Wi-Fi Networks screen when no networks are available.
• [For IQ EV Charger users in Europe] Fixed the issue that prevented EV charging on some sites when IQ EV Charger was in Smart Charging mode.

What’s new

For all installers:

1. Added filters to the parameters that were missing from the System List

   Some parameters in the System List did not have filtering capability until now. Now, users can filter these parameters:

   1. Issue Count
   2. Owner Email
   3. System Size
   4. Current Power
   5. Operational
   6. Interconnection Date
   7. % of estimated (month)
   8. % of estimated (lifetime)

What’s fixed 

1. Fixed the issue of incorrect translations in the IQ Relay Self Test report for the Italian locale shown under the Reports tab.

What’s new

For all Enphase App users:

1. Enhanced gateway connectivity feature

   Users are now shown a warning message if they select a weak Wi-Fi network while configuring Wi-Fi for their gateway.

   

What’s Fixed

For all Enphase App users:

• Bug fixes and minor enhancements.

What’s new

For Enphase App users on Smart Solar Billing plan in Illinois:

1. Updated Electricity Rate Settings

   Users can add and view their Hourly Dynamic Prices by selecting their Utility and Rate Name. Go to Menu > Settings > Electricity Rate

   

2. Updated Battery Settings

   Users can set their batteries to charge from grid or discharge to the grid as per the battery mode set during system commissioning by the installer. Go to Menu > Settings > Battery

   

3. Update Site Details

   Users can view their grid connection details: Connection Type, Connection Year and Battery Mode. Go to Menu > System > Site Details

   

What’s fixed

• [For IQ EV Charger users in North America and Europe] Resolved an issue that frequently caused EV chargers' status to appear offline incorrectly.

What’s fixed

For all IQ EV Charger users in North America and Europe

• Resolved an issue preventing Green charging from working for certain users.
• Fixed a bug that was causing Off-Peak schedules to be disabled in specific cases.

What’s fixed

For Enphase App users with an IQ PowerPack 1500 in the United States and Canada: 

1. Bug fixes and minor enhancements.