Get ready for Ensemble™
Your Energy · Your Choice · Always On
With Ensemble™ technology, when the grid is down, you have power.And when the grid is up, you can save money.
-
Encharge 10™ storage system
The Encharge 10™ all-in-one AC-coupled storage system, comprised of three base Encharge 3™ storage units, provides a total usable energy capacity of 10.1kWh and twelve embedded grid-forming microinverters. Connect multiple Encharge 10 storage systems to maximize backup potential for whole home backup.
-
Encharge 3™ storage system
The Encharge 3™ all-in-one AC-coupled storage system provides a total usable energy capacity of 3.4kWh and four embedded grid-forming microinverters. It provides great flexibility in starting small and adding incremental capacity.
-
Enpower™ smart switch
The Enpower™ smart switch connects the home to grid power, the Encharge storage system and PV. It provides microgrid interconnection device (MID) functionality by automatically detecting and seamlessly transitioning the system from grid power to backup power in the event of a grid failure.
-
Wireless communication kit
The wireless communication kit enables direct communication between Encharge, Enpower, and IQ Envoy. It uses 2.4 GHz and 915 MHz frequencies in parallel for maximum reliability. The kit will be connected to one of the USB ports on the IQ Envoy.
-
IQ™ combiner series
The IQ™ combiner consolidates interconnection equipment into a single enclosure and streamlines PV and storage installations by providing a consistent, pre-wired solution for residential applications. Install the new communication kit in any IQ combiner to enable wireless communication with Encharge and Enpower. Installation of the cellular modem is required unless already present in the IQ combiner. This ensures the best performance of your system.
Download Combiner 3C Datasheet >Download Combiner 3C Quick Install Guide >Download Combiner 3 Datasheet >Download Combiner 3 Quick Install Guide >
-
IQ series microinverters for Ensemble technology
Ensemble technology for battery backup configurations is fully compatible with IQ 7™ and IQ 6™ series microinverters, making retrofit upgrades as simple as new installations.
Download IQ 7A Datasheet >Download IQ 7X Datasheet >Download IQ 7 Datasheet >Download IQ 7 Quick Install Guide >Download IQ 6 Datasheet >Download IQ 6 Quick Install Guide >
Common configurations
Ensemble systems support whole home or partial home backup configurations.
Click a configuration type below to see a system design overview.
Whole home backup
Partial home backup
It's this simple
With the features you would expect
At the core of every Ensemble technology product, you’ll find an unparalleled set of features that have been designed with the solar professional in mind.
Safe
Simple
Smart
- No high-voltage DC batteries
- Lithium iron phosphate (LFP) battery chemistry
- End-to-end AC-coupled system architecture
- Compatible with IQ 6™ and IQ 7™ series microinverters
- Mix and match 3.4kWh and 10.1kWh storage systems
- Smart plug-n-play distributed architecture makes installation quick and easy
- All-in-one commissioning simplifies and accelerates setup time
- Over the air software upgrade helps avoid truck rolls
- One supplier for every system component and warranty support
- One platform for commissioning, monitoring, and troubleshooting for solar and storage
- Whole or partial home backup with service up to 200A
And the reliability you can count on
As a solar professional, we understand that your name is on the line for every project you install. That’s why we’ve designed and built Ensemble technology to be as reliable as our trusted IQ™ microinverter.
Ensemble technology is the culmination of years of research, design, development and testing. Distributed architecture with no single point of failure, resistant to extreme temperatures and humidity based on semiconductor technology, passive cooling system with no moving parts – these are just some of the ways Ensemble technology has redefined reliability.
