Centro de soporte

Descargue hojas de datos, resúmenes técnicos, guías de instalación, y mucho más.



Filtrado por
Región
TU SELECCION (25)
(25)
Enphase Installer Portal release notes (24.9.4)
November 8, 2024

What’s new 

For all installers: 

  1. Added the ability to view warranties for select devices

    Installers can now view the warranties of some Enphase devices under the Devices tab.

    The devices include:

    • IQ Gateways 
    • IQ System Controller 
    • IQ Batteries 
    • Microinverters

screenshot

 

 What’s fixed 

  1. Addressed the issue of not being able to provision devices from the System Dashboard. 
  2. Resolved the problem of SMS notices not being sent to users. 
  3. Fixed the issue of being unable to download Commissioning Logs CSV from the System Dashboard. 
New Activation Page release notes (1.11.0)
October 30, 2024

What’s new

For all installers:

  1. Improved battery mode selection

    Battery mode selection is now part of the System Information page. This will reduce the time spent by technicians in the field.

     

  2. Wiring verification for battery mode changes

    When changing the Battery Mode from Import Only to Export Only, installers will be shown instructions to verify the main load panel wiring.

    Image2

     

  3. Ability to add device serial numbers before gateway serial numbers

    Installers can now add serial numbers for IQ Microinverters and Q/IQ Relays without entering a gateway serial number, which provides greater flexibility and convenience.

    Image3

     

  4. Warning for unusual breaker sizes in PCS sites

    A warning will appear on the PCS Based Limiting page if an installer selects an uncommon breaker size (0-15 A) in the Main Panel Upgrade Avoidance and IQ Battery Oversubscription sections.

    Image4

  5. Aggregate Power Export Limit setting in the Configuration section

    Installers now have the ability to directly select the Aggregate Power Export Limit (PEL) on the PCS Based Limiting page of the Configuration section, if available for the geography.

    image5

    Image5b

What’s fixed

For all installers:

  1. Other bug fixes and improvements.
Enphase Installer Portal release notes (24.5.0)
September 26, 2024

What’s new

For installers:

  1. Added the ability to simultaneously view production data from microinverters and the production meter under the Graph tab
     
    • Under the Graph tab, installers can now choose to simultaneously view production data from microinverters and the production meter for individual systems. 
    • Installers can select Production (Meter) or Production (Microinverters) in the Select View Option drop-down in the Graph tab to view both at the same time. 

Graph imageWhat’s fixed

  1. Addressed the issue of low State of Charge (SoC) emails being sent to installers for on-grid systems.
  2. Resolved a problem of systems showing minor meter issues which are not persistent and are caused by external irregularities such as voltage or frequency.
  3. Fixed the issue of an empty System List page being displayed in the Fleet Dashboard.
Enphase Installer Portal release notes (24.4.3)
August 14, 2024

What’s new

For installers in the United States:

  1. Enhancements on the Fleet Dashboard for easier use 
     
    • Filters can now be individually applied below each sub-category of filters.
    • Filters can also be applied by pressing the Enter button.
    • The System List tab has been positioned to the left of the Overview tab, and is now the default landing page when navigating to the Fleet Dashboard.

System overview image

System overview

What’s fixed

  1. Resolved an issue of the Missing Branch Circuits test failing on a few systems when Production CT health checks are initiated.
  2. Fixed the issue of per-phase battery charge and discharge not being visible on the graph after the battery is retired. 
New Activation Page release notes (1.10.0)
August 7, 2024

What’s new

For all installers:

1. Preventing duplicate site creation

We have updated the New Activation Page to help installers avoid creating duplicate sites.

This enhancement is crucial as it prevents data loss in existing sites caused by the creation of duplicate sites during system expansion, storage addition, or site upgrades under the Enphase Upgrade Program.

AR_Final

2. New voltage and phase information for commercial sites

If a commercial site is in either Australia, New Zealand, India, or South Africa, the 230 V Three-Phase option will be shown in the Electrical Parameters field.

img2

If a commercial site is in the United States or Canada, the following options for Electrical Parameters will be shown:

  • 208 WYE/120 V Three-Phase
  • 240/120 V Single-phase
  • 208 V Single-phase

img3

What’s fixed

For all installers:

1. Other bug fixes and improvements.

Enphase Installer Portal release notes (24.4.0)
July 30, 2024

What’s new

For installers in the United States:

  1. Additional information is now provided in the Systems list on the Fleet Dashboard

    Installers can now view the following additional columns in the Systems list:

    • Issues
    • Financing Type
    • Cell Modem
    • Cell Modem SKU Type
    • Cell Modem Plan End Date
    • Grid Status
    • Storm Guard Status
    • Charge From Grid Status
    • Battery Profile
    • Reserved SOC
    • SOC
    • Utility Name
    • Rate Name
    • Import Plan Name
    • Export Plan Name
    • Grid Connection Type
    • Grid Connection Year
    • Battery Operating Mode (NEM 3.0)
    • IQ Battery Type
    • IQ System Controller Type
    • Grid Services Program Name

    Also, installers can now select None to filter columns with missing information.

    Reports screenshot image

    Reports screenshot image

    Systems screenshot image

  2. Added the ability to generate Yearly Production and Consumption reports from Fleet Dashboard

    Installers can now generate Systems Yearly Production and Consumption reports from the Reports tab. This report provides energy production and consumption for all of the installer’s systems during the specified years.

    Reports section under the Fleet Dashboard screenshot

    Reports tab in the Systems section of the Fleet Dashboard

    Systems Yearly Production and Consumption

    Select the Systems Yearly Production and Consumption report

    Select the years for which the report is required

    Select the years for which the report is required

    Report screenshot

    The report is then sent as an email

    Email sent to users

    Email sent, containing the report as an attachment

What’s fixed

  1. Resolved the issue of the PV array not being saved despite all the requisite information being provided.
     
  2. Fixed the incorrect location of the Consumption Current Transformer (CT) on the Load with Solar production configuration.
     
  3. For installers in Italy, resolved the issue of the Enphase Installer Portal showing only wide-band, and not narrow-band, test data for self-test reports with IQ Relay 2.0 and 1.3.4 firmware.
     
  4. Updated the system statuses for Enphase EV Chargers and third-party EV chargers:
     
Current system statusesUpdated system statuses
EVSE Not ReportingEV Charger Not Reporting
EVSE FaultedEV Charger Faulted
IQ Energy Router EVSE Not ReportingEV Charger Not Reporting

 

Enphase Installer Portal release notes (24.3.0)
June 2, 2024

What’s new

For all installers:

  1. Added the ability to perform Consumption CT health checks 
     

Installers can now navigate to the Consumption CT page under Devices and click Verify CT to initiate a series of checks on the respective Consumption CT. Verify CT triggers checks for the following four scenarios, and if any check fails, installers are provided with suggested actions to rectify the issue.

  • Configured as Load Only but installed as Load with Solar production
     
  • Configured as Load with Solar production but installed as Load Only
     
  • Consumption CTs are not installed but are enabled on the Enphase Installer Portal
     
  • Consumption CT polarity needs to be reversed
     

Configured as Load Only but installed as Load with Solar production

Configured as Load with Solar production but installed as Load Only

Consumption CT is not installed but is enabled on the Enphase Installer Portal

Consumption CT polarity needs to be reversed

No issues were found with the Consumption CT

For installers in countries with IQ Energy Management:

  1. Added the ability to perform replacement of IQ Energy Management devices
     

As with conventional Enphase systems, installers can now use the Install Replacement and Replace Gateway options to perform replacement of the following IQ Energy Management devices:

  • EV chargers and heat pumps
     
  • IQ Energy Router
     

EV charger and heat pump replacement:

Select Install Replacement

Select the device type

Confirm device details

Replacement is in progress

Replacement is complete

IQ Energy Router replacement:

Select Replace Gateway

Select IQ Energy Router as the device type

Enter device details and confirm

Replacement is in progress

Replacement is complete

For installers in California:

  1. Grid connection year is now shown based on input in the Enphase Installer App
     
  • Installers can now view the Connection Year on the Settings page of the Enphase Installer Portal, based on the interconnection application date provided in the Enphase Installer App.
     
  • If the interconnection application date is unavailable, the connection year will be shown as Not Available.
     

The Enphase Installer Portal displays the Connection Year as entered in the Enphase Installer App. If the date is unavailable, the connection year is shown as Not Available.

What’s fixed

  1. Resolved the issue of some Mexico users seeing a time in Enphase products that differed from their local time.
     
  2. Fixed the issue of a few installers not being able to submit the Labor Reimbursement form despite providing all the requisite information on the Portal.
     
  3. Updated the terms and conditions of the Labor Protection Program agreement.
     
  4. Clarified the Self Service section of the Portal by updating the Request Return button to Request RMA.
     
Enphase Installer Portal release notes (24.2.0)
March 13, 2024

What’s new

For installers in countries with Enphase Home Energy Management:

1. Added new devices to the Devices page

On the Devices page, installers can now view device details for the new devices that are integrated into Enphase Home Energy Management, including the IQ Energy Router, EV chargers, and heat pumps.

Enphase Installer Portal release notes (24.2.0) Picture 3

                                                                                       New device details for EV chargers and heat pumps

2. Added consumption data for heat pumps and EV chargers in the Graph view

In the Graph view, installers can now see consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.

Enphase Installer Portal release notes (24.2.0) Picture 4

                                                                                        New device consumption data in the Graph view

3. Added consumption data for heat pumps and EV chargers to the Reports page

On the Reports page, installers can now view consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.

Enphase Installer Portal release notes (24.2.0) Picture 5

                                                                                              New device reports in the Reports section

4. Added new system statuses to indicate new device errors

Installers can now view the following system statuses on the Systems page to identify issues related to new devices integrated into Enphase Home Energy Management.

IQ Energy Router Not Reporting

IQ ER EVSE Not Reporting

Heat Pump Not Reporting

Heat Pump Error

Enphase Installer Portal release notes (24.2.0) Picture 6

 

What’s fixed

1. Resolved the issue of Meter Measurements not being enabled by default, even though CTs were enabled on a system.

2. Resolved the issue of system statuses being incorrectly switched between Meter Issue and Normal within a short time.

Enphase Installer Portal release notes (24.1.0)
February 9, 2024

What’s new

For all installers:

1. Added ability to reverse the polarity of Storage CTs

Installers can now navigate to the Storage CT page under Devices and click Reverse Polarity to reverse the polarity of the respective Storage CT.

Screen to reverse Storage CT polarity

 

2. Added the ability to make a few reports available immediately under the Reports section

Previously, users had to wait 24 hours for enough data to be collected to prepare a report. In this release, we have added the ability to make the below reports available immediately without waiting 24 hours:

· IQ Relay Self-Test Report

· Grid Profile Settings Report

· Microinverter Routine Test Report

Ability to make a few reports available immediately under the ‘Reports’ section

For installers in the United States, Puerto Rico, and Canada:

The following products and their respective SKUs have been made eligible for labor reimbursement.

S. No. Product SKU
1 IQ Combiner 5 X-IQ-AM1-240-5
2 IQ Combiner 5C X-IQ-AM1-240-5C
3 IQ System Controller 3 SC200D111C240US01
4 IQ System Controller 3G SC200G111C240US01
5 IQ Battery 5P IQBATTERY-5P-1P-NA
6 IQ Combiner 4 X-IQ-AM1-240-4
7 IQ Combiner 4C X-IQ-AM1-240-4C
8 IQ Combiner 4 X2-IQ-AM1-240-4
9 IQ Combiner 4C X2-IQ-AM1-240-4C

What’s fixed

1. Fixed the issue of users not being able to select a device from search results in the Install Replacement section.

2. Fixed the issue of not showing System Controller Issue and Battery Issue system statuses in the System List.

3. Fixed the issue of showing non-relevant devices under the Devices tab of the system. Only those devices which are present in the system and reporting to the Enphase Cloud will be displayed to end users. The Devices tab will also consist of devices that had reported at least once for that particular system.

4. Relaxed the Array Builder validations so that both arrays can be built on the Array Builder for sites with both IQ8 Microinverters and other models of microinverters.

5. Updated Production CT health check logic to check for existing system status to provide recommendations.

Enphase Installer Portal release notes (23.9.0)
December 26, 2023

What’s new

For all installers:

  1. Added Service Manager link within the Installer Portal for easy access to a system

    Installers can now navigate to a system within the Service Manager from the Installer Portal as a logged-in user by clicking Service Manager within the system view.

    Service Manager Link within the Installer Portal

     

  2. Added ability to set Dark Mode and remove images within the kiosk view

    Installers can now set Dark Mode within the kiosk view as well as delete any uploaded images.

    ability to set Dark Mode and Remove Images within the Kiosk view 

    Option to enable/disable Dark Mode

     Option to remove the image and save 

    Option to remove an image and save

  3. Added a new SKU within the Microinverter Routine Test Report

    Installers in Thailand need to generate a routine test report for the MEA and submit it to the local utilities for interconnection agreements. In previous releases, we added the ability for installers—within the reports section for an individual site—to generate a report for the IQ7 Microinverters in a system. In this release, the IQ8P Microinverter below is added to the report.

    • IQ8P-72-2-INT

    Added a new SKU within the Microinverter Routine Test Report

     

What’s fixed

  1. Fixed the issue of Thai fonts not being downloaded correctly within the reports downloaded from the Installer Portal.
  2. Fixed the issue of legacy tariff editor not being available for ACB systems within the System Settings page.
  3. Fixed the issue of wrong device statuses showing up for Wireless Range Extender or device statuses not showing at all.
Enphase Installer Portal release notes (23.8.0)
November 29, 2023

What’s new

For all installers:

  1. Informing installers in case of multiple polarity reversal attempts for the same system

    Installers will now be informed and asked for confirmation if they wish to proceed with the polarity reversal of any meter if the polarity of the same meter was reversed less than 24 hours before. This ensures that polarity reversal is not performed twice unintentionally, resulting in no change in polarity.

    Switch the polarity

     

  2. Added capability for installer company administrators to specify job roles at the time of new user creation

    At the time of new user creation, administrators of installer companies can now specify the job role that the new user has within the installer company. For example, this may include roles such as Project Manager, Marketing/Sales, and Finance.

    adding new user's image account details image

     

  3. Added ability to hide installer name at the time of kiosk creation using the Fleet dashboard

    We have implemented the ability to hide the installer company’s name and logo at the time of kiosk creation using the Fleet dashboard.

    Option to enable or disable the installer name and logo:

    new display profile image

     

    Example of the kiosk interface when the installer name and logo are disabled:

    new display profile image

  4. Allowed access to view kiosks created by other users within the same company

    Installer users will now be able to view kiosks created by other users belonging to the same company.

    access allowed to view kiosks

Bug fixes

  1. Fixed the loss of per-phase consumption and per-phase production curves with IQ Gateway replacement.
  2. Resolved language discrepancies for the reports section in French locale.
  3. Renamed the System Configurator in the Quick Access section to System builder.
  4. Added the Status Since column to the Fleet Status tab in the Fleet dashboard.
Enphase Installer Portal release notes (23.7.0)
October 19, 2023

What’s new

For all installers:

  1. Added Status Since column to the Fleet dashboard

    We have included a new column, Status Since, on the Fleet Overview page of the Fleet dashboard. This column provides the date and time that the Status column last changed.

    1

What’s fixed

For all installers:

  1. Resolved language discrepancies for homeowner email communications. Emails are now sent using the language chosen by the homeowner when setting up the account.
  2. Corrected syncing of Spanish training courses between Enphase University and the Enphase Installer Portal to ensure they count towards commissioning requirements.
  3. Fixed the user preference to maintain the preferred view of the Systems page when the user navigates from the new Fleet dashboard to the classic view.
  4. Eliminated the bug associated with the display of grayed-out microinverters producing power in the Array view.
  5. Added special characters when searching for an authorized subcontractor email.
  6. Updated wording on the New User Registration page to reduce confusion for installer companies planning on installing Enphase Energy Systems so that the Installer role is assigned and they can properly commission systems.
  7. Resolved issues when logged-out users attempt to accept or reject consumption data requests on the Dashboard page.
  8. Fixed the issue for sites with cellular modems inaccurately displaying as Retired on the Devices page, despite the modems remaining active with the sites’ gateways.
  9. Corrected the PLC Noise Detection graph to show correct PLC noise levels.
  10. Removed the Reserve SoC setpoint on the Systems page for systems that have a battery but do not have an IQ System Controller.
Enphase Installer Portal release notes (23.5.0) 
August 8, 2023

What's new?

For all installers:

  1. Improved visibility of system access requests

    The functionality to request access to a customer’s system is now visible on the Account drop-down menu. By selecting Request System Access, installers can send a link that allows the customer to provide access to their system. Installers no longer need to contact Enphase Support for access.

    2

For installers in Brazil:

  1. Introduced the Enphase Installer Network in Brazil

    Our installers in Brazil now have access to the Enphase Installer Network (EIN). The EIN is our trusted network of installers who deliver exceptional homeowner experiences using Enphase products. The appropriate terminology and translations in Brazil are reflected in the EIN dashboard.

What's fixed?

For all installers:

  1. Extended the time to claim a labor reimbursement to three months from the date of an RMA submission, if the RMA is submitted within two years of device activation.
  2. Updated error messages throughout the Enphase Installer Portal based on localization.
  3. Improved the titles of installer-generated reports.
  4. Added the Power off by Command status for systems with IQ8 Microinverters.

For installers in Thailand:

  1. Removed the State field on the registration page.

For installers in Spain:

  1. Fixed the Service Area form.

For installers in Netherlands:

  1. The Chamber of Commerce Number is no longer a mandatory field.
Enphase Installer Portal release notes (23.4.0)
July 6, 2023

What's new?

1. Improved Accessibility to Gateway Page for Power Production Control

When the system status indicates a power production issue due to a command, users will be shown a tooltip message that directs them to the IQ Gateway page in the Devices tab, allowing them to easily turn on power production themselves by clicking on the provided link.

cvbbn

What's fixed?

1. Disabled registering a new account when a user signs up using an email address already in the system.

2. Updated the link when clicking on a System Name in the Fleet Dashboard activation widget to now redirect to the Activation page.

3. Fixed translations in the French email template and throughout the Enphase Installer Portal settings page.

Enphase Installer Portal release notes (23.2.2)
May 15, 2023

What’s fixed

  1. Improved reliability for the "Replace Gateway" feature when microinverters are not producing power.
Enphase Installer Portal release notes (23.2.0)
March 27, 2023

What’s new

  1. Changes to access control
    Now when users are granted third-party access to a system, they are given view-only capabilities and restricted functionalities. This change was made to control unrestricted access.

  2. Authorized subcontractor search
    Search functionality for authorized subcontractors is added to the Activation page dropdown menu. This enhancement improves the experience when selecting from many subcontractors under the dropdown.

    production estimate

     

  3. Germany and Spain Enphase Installer Network launch
    The Enphase Installer Network is now launched in both Germany and Spain. Documentation and links have been made available in German and Spanish.

  4. RMA request changes
    When an installer initiates an RMA request from the Enphase Installer Portal, the user is now required to specify if the recipient is the homeowner, system host, or installer. This change ensures the shipping label is accurate.

    4.1

     

    4.2
  5. Grid Profile update on the Settings page
    Users can now update the Grid Profile on the Settings page in addition to the Activation page.

    5.15.2

     

  6. Editing details for homeowners who haven’t logged in
    If a homeowner has not accessed their account, the installer can now edit homeowner details up to six months from the installation date. This change will prevent additional user creation in the Enphase Installer Portal.

  7. Battery activation checklist
    A checklist now exists on the Activation page for storage systems. Users can track the steps involved with commissioning battery systems.

    7.1

     

  8. New systems list data
    Three new columns are added to the Systems list page. These columns are “SOC %,” “Storm Guard Status (Enabled/ Disabled),” and “Battery Profile.”

    8.1

     

  9. Microinverter firmware version information
    Microinverter firmware version information is now available in both the microinverter device table of the System page and in the Grid Profile Settings Report.

    9.1.png9.2

     

What’s fixed

  1. Improved messaging on Activation page. Removed the text “User has logged in and cannot be edited” as it can be misleading.

  2. Self-installers now have access to the Grid Profile list in the Data & Privacy tab.

  3. Fixed an issue where an IQ Battery that has moved to a new site would continue reporting data to its original site.

Enphase Installer Portal release notes (23.1.0)
January 31, 2023

What’s new

  1. Registration page update
    We have updated the text on the Enphase Installer Platform that appears at the time of registration to inform users that they may be contacted via calls or text messages with updates regarding system information, upgrades, and marketing messages.
     

    account detail

     

  2. EV callout in Change of Ownership page
    After a “Change of Ownership” is confirmed, you will now see a link to learn more about the new line of Enphase EV Chargers.
     

    change of owner

     

  3. Relabelling “Ensemble Certified” to “Storage Authorized Installation Company”
    On the Company Performance Scorecard, we have updated the naming convention from “Ensemble Certified” to “Storage Authorized Installation Company” for installers who are eligible to commission Enphase Storage Systems.
     

    Ensemble Certified

     

  4. Added links to Yellow Page and Annuary Qualit’EnR
    For installers in France, we have added links to Yellow Page and Annuary Qualit’EnR in the “Ratings & Reviews” section of the Enphase Installer Network dashboard.
     

    yellow page

     

  5. Training dashboard enhancements
    We have added a “Commissioning Authorization” section in the Training Dashboard. This section shows the certifications and courses required for commissioning certain system types. Currently, this section is accessible only to the administrators.
     

    training dashboard

     

  6. Power production restrictions
    To prevent unauthorized restarting of the IQ Gateway, we have added restrictions to the “Enable Power Production” and “Disable Power Production” features. The following personnel have access to this feature:

    • System owner
    • System maintainer
    • System installer
    • Authorized subcontractors
    • System host (in case of PPA or leased systems)

     

    prod1prod2prod3prod4

     

What’s fixed

  1. Introduced more automation to improve the turnaround time for the Change of Ownership process.

  2. Ordered the Authorized Subcontractor dropdown list alphabetically on the Activation page.

  3. Improved the reliability of one-time passwords for new users.

  4. Fixed the PDF download issues of Power and Energy production graphs.

  5. Reduced the time for our systems to update when fixing meter issues from 24 hours to 12 hours.

Enphase Installer Portal release notes (22.6.0)
January 15, 2023
What’s new
  1. Enphase O&M Marketplace integration
    An Enphase O&M Marketplace (formerly 365 Pronto) section is now visible in the Enphase Installer Portal. The Enphase O&M Marketplace integration allows for easy access from within the Enphase suite of installer applications. Enphase O&M Marketplace allows installers to accept work orders and track them all within the platform.

    Screenshot of new features in Enphase Installer Portal
     
  2. Email trigger improvements
    We have made updates to the way we trigger emails to homeowners as part of the onboarding process. These changes are designed to ensure homeowners do not prematurely receive communications to register their site before it is active.
     
  3. Mandatory PV module details
    The Activations page within the Enphase Installer Platform has been updated to make PV module details mandatory for both residential and commercial system installations. Installers will need to add the details during the installation process. If the PV module details are not available in the dropdown, there will be an option to select "Other" and submit a form with the details of the PV module being installed.

    Screenshot of Enphase Installer Portal with highlighted PV module settings
     
  4. Training dashboard changes
    The training dashboard for the Enphase Installer Platform has been updated with various enhancements. The synchronization time between the platform and the Enphase University website has been adjusted to match the actual time needed for the process. Additionally, any updates to a user's profile (such as changing companies or becoming a self-installer) will now transfer their existing certifications to the new credentials on both the Enphase University website and the Enphase Installer Portal.
     
  5. IQ Gateway firmware upgrade checks
    We have added a check to the array builder that prevents tasks from being sent to the IQ Gateway if it is not running the correct firmware version. This is to minimize errors that may occur during commissioning.
     
  6. Quick access toolbar changes
    We have expanded the links accessible in the Quick Access toolbar to now include:
    • System Configurator
    • Critical Updates
    • Documentation
    • Brand Library
    • Training

    Screenshot of Enphase Installer Portal with highlighted quick access links
     
  7. Additional validation for company registration in the Netherlands
    For installers in the Netherlands, we have added a requirement for a Chamber of Commerce number to register on the Enphase Installer Portal. This change was made to prevent homeowners from registering as installers.

    Screenshot of Enphase Installer Portal registration form
     
  8. Dynamic power exporting limit for systems in Australia
    We have enabled the ability to limit power production for a specific Gateway for systems present in Australia.

    Screenshot of Enphase Installer Portal with highlighted System Location

    Screenshot of Enphase Installer Portal with highlighted Power Production edit button
     
  9. Battery report enhancements
    We now allow the generation of battery discharge reports for specific battery units by their serial numbers. This feature is being introduced to meet the requirements of the California Incentive Program, SGIP, which mandates that homeowners and installers provide these reports for certain battery units. These reports can be created in the Reports section.

    Screenshot of Enphase Installer Portal battery report
     
  10. Account tab accessibility for non-installer company administrators
    We have updated permissions for all non-installer company administrators to provide them with access to the Accounts tab. This will ensure that they can perform necessary administrative operations smoothly.
     
  11. Grid Status column availability on the Systems page
    We have introduced a new column, Grid Status, on the Systems page within the Enphase Installer Portal. This column will provide a quick overview of the grid status for each system in an installer's fleet.

    Screenshot of Enphase Installer Portal column settings drop-down menu

    Screenshot of Enphase Installer Portal showing new Grid Status column
System Diagnostics Tool
November 10, 2022

The new System Diagnostics tool within in system dashboard gives the installers ability to issue specific commands to get the desired results based on the command selected for troubleshooting purposes.  

 

A description for each of the tasks that are available to the installers is given below. 

 

  • Provision Device - provision devices identified by comma separated list of Serial Numbers

  • Force update - force update to IQ System Controller/IQ Battery reporting to the selected Gateway

  • Change consumption meter state - change the state of Consumption Meter: Net or Total 

  • Enable/ Disable power production - enable/ disable production of power at a site 

  • Reboot Gateway - reboot the selected Gateway device 

  • Check tariff - check the Tariff details (like currency, consumption mode, consumption schedule, etc.) for the site 

  • Get Zigbee status - get status of the Zigbee device (details like serial number, channel number, etc.) 

  • DC Switch State – verify the true state of the DC switch, whether on or off 

  • Reset Ensemble device – reboot any IQ Battery device at a site. User can also view the IQ Battery device name along with the serial number 

 

Executing Tasks from the System Dashboard – User Guide 

 

  1. Log in to Enphase Installer Platform - Enphase Energy - Enlighten | Sign in to Enlighten 
     

     Screenshot 2023-11-07 185323

    2. Navigate to Systems tab at the top 
    img2

     

    3. Search for the desired system for which you wish to execute commands and click on the system name.

    img3

    4. Click on the blue System Dashboard Tab in the top right as shown to navigate to the System Dashboard.

    img4

    5. Click on the System Diagnostics tab towards the right of the top menu, as highlighted below.

    img5

    6. Click on the dropdown with label ‘Task’. You shall be able to see a list of all tasks that can be executed for this system.

    img6

    7. Select a task to execute from the list and then click on Submit

    img7

    8. You shall be able to see a notification that the task has been scheduled. The executed task shall also get added to the task history table in the bottom of the page.

    img8

    9. For some of the tasks, you shall be able to see the task response by clicking on ‘Response’ button in the Result column (last column)

Enphase Installer Portal release notes (22.5.0)
October 20, 2022

What’s new?

We are always working to improve and simplify your experience with Enphase. Below, you will see detailed information about the features and changes we have introduced to make installation and monitoring faster, easier, and more streamlined for our Installers.

  1. Training Dashboard Enhancements

    We have improved the recently launched training dashboard feature to improve user experience. Users will now be able to:

    • exporttables in a csv format.

    • view their learning path progress status inpercentages.

    • show learning paths available by region

    • view course completion dates for each learning path.
      MicrosoftTeams-image (1).png

  2. Labor Reimbursement Update

    We have updated the labor reimbursement process in the Enphase Installer Platform to reconcile with the latest changes within our terms and conditions.

  3. Reverse CT Polarity Logic

    If Production and Consumption Meters are installed incorrectly at the time of commissioning, the installer can now reverse the polarity remotely. This can be achieved by clicking the “Reverse Polarity” button through the CT Summary Page on the respective system page’s Devices Tab.

  4. Default Changes for CT Product Reading

    For sites with Production or Storage Meters installed, settings will now default to Meter Measurements or Storage Meter Measurements.
    MicrosoftTeams-image.png

  5. Company Performance Scorecard Availability for Mexico Region

    Changes were made to the company performance scorecards to ensure that parameters for Mexico and the United States appeared the same.

  6. Array Builder Serial Number Validity Check

    When a Serial Number is scanned within the Array Builder it is now validated at that time for inconsistencies and an appropriate error message will be displayed to the user.
    Capture111.PNG

    Capture12.PNG

  7. System Diagnostics Tool Enhancements

    The new System Diagnostics tool within in system dashboard gives the installers ability to issue few commands to get the desired results based on the command selected for troubleshooting purpose. The history of all the commands issued can be viewed within the table

    • Clear all IQ System Controller errors - clear the selected errors from IQ System Controller reporting to the selected Gateway

    • Provision Device - provision devices identified by comma separated list of Serial Numbers

    • Force update - force update to IQ System Controller/IQ Battery reporting to the selected Gateway

    • Change consumption meter state - change the state of Consumption Meter: Net or Total

    • Enable/ Disable power production - enable/ disable production of power at a site

    • Reboot Gateway - reboot the selected Gateway device

    • Check tariff - check the Tariff details (like currency, consumption mode, consumption schedule, etc.) for the site

    • Get Zigbee status - get status of the Zigbee device (details like serial number, channel number, etc.)

    • DC Switch State – verify the true state of the DC switch, whether on or off

    • Reboot Zigbee – restart the Zigbee device in the IQ Gateway

    • Reset Ensemble device – reboot any IQ Battery device at a site. User can also view the IQ Battery device name along with the serial number
      MicrosoftTeams-image (3).png

What’s Fixed?

  1. Canadian Installer Tax Forms while Submitting Reimbursement Requests

    Installers in Canada who are submitting reimbursement requests will now see the correct tax form displayed.

Enphase Installer Portal release notes (22.4.2)
September 16, 2022

What's fixed?

Rectification of array builder issue where the position of microinverters was jumping when the serial numbers were scanned

Few issues were observed during the commissioning process within the Enphase Installer App while the user was adding Microinverters to the Array Builder. These issues were impacting the commissioning experience and time.

Microinverters, which were being scanned on to respective panels within the Array Builder, were seen to be jumping positions and being assigned to panels in which it was not meant to be. Moreover, if a Microinverter was being scanned twice, the Microinverter was getting assigned at both the places leading to further confusion. To rectify these pending issues, the user was required to unassign the Microinverter from the panels and then assign it back again to the correct panel. All of this resulted in increase of the commissioning time.

As part of the fix, we made sure that an already assigned Microinverter is not being assigned to another panel if it is being scanned twice. Instead, we are displaying the appropriate message to the user that the concerned Microinverter has already been assigned to another panel. This fix will also ensure the problem of Microinverters jumping from one panel to another and getting assigned is also fixed automatically.

EIP-img.png

Enphase Installer Portal release notes (22.4.0)
August 10, 2022

What’s new?

We are always working to improve and simplify your experience with Enphase. Below, you will see detailed information about the features and changes we have introduced to make installation and monitoring faster, easier, and more streamlined for our Installers.

  1. Rectification of Gateway Reimbursement Logic

    The Gateway Labour Reimbursement logic in Enphase Installer Portal was not functioning as designed. It was enabling installers to raise reimbursement request for IQ Gateways installed before 1st October, 2020.

    The logic was fixed in the Enphase Installer Portal to only show the correct Gateways that will be eligible for Labour Reimbursement. In accordance with our terms and conditions, Gateways having an installation date before October 1, 2020 will no longer be eligible for reimbursement from the Enphase Installer Portal.

  2. Slew Rate Parameter addition for Dynamic PEL in Germany

    Slew Rate is a mandatory parameter to setup Dynamic Power Exporting Limit (PEL) in Germany. Additionally, Gateway versions greater than 7.4.10 require a Slew Rate parameter.

    While setting up the Dynamic PEL for systems based in Germany, users will be asked to mandatorily input a new parameter named Slew Rate (measured in Watt / Sec).

    Graphical user interface, application  Description automatically generated

  3. Meter CT Measurements information addition for Negative Consumption

    There were issues reported that the issues related to Meter CT measurements are confusing in nature and need to be more specific.

    Analysis of this issue provided us the insight that most of these issues were caused due to negative readings observed for Production/ Consumption measurements. For installers to be better informed, we have included an info icon whenever a Meter issue related to CT Measurements is observed. Clicking on that info icon will show accurate message to the user regarding the probable reason of occurrence of the issue.

  4. Diagnostic Mode Tasks for Cell Modem Sites from Enphase Installer Portal

    Enabling diagnostic mode remotely for a cellular site, enable it to behave as if it is on a broadband site. This will allow verification of system production much quicker than is done today, where one needs to wait for 6 hours at least for verification of system production for cellular sites.

    In the Gateway Page, for cellular sites, installer can select Diagnostic Duration in the report settings after selecting Low Bandwidth. This will enable installers to verify system production in a quicker manner by giving them the flexibility to choose the time interval in which they wish the data to be reported to Enphase Cloud.

    Graphical user interface, text, application, email  Description automatically generated

  5. Addition of 230 V 3-Phase Selection for ROW Commercial Sites

    For commercial systems in the rest of the world (ROW) region, the requirement was to provide the user with the phase option of 230 V 3-Phase.

    Based on this, user has been given the option to select the 230 V 3-Phase option in Enphase Installer Platform for ROW Commercial Sites.

    Graphical user interface, text, application  Description automatically generated

  6. Array Builder UI Improvements

    We introduced the following features to improve the experience for the user while accessing the Array Builder application.

    • User will now be shown the Array Names next to the array that has been built in the Array Builder.

    • User will now be able to filter and only view arrays that are reporting to a specific Gateway if they wish to within the Array Builder.

    • User will now be able to view individual module level information within the Array Builder application.

    Table  Description automatically generated

    Table  Description automatically generated

  7. Auto-Zoom functionality in Array Builder

    Users reported that the auto-zoom functionality in Array Builder can increase the turnaround time, especially when creating large arrays. It hinders the seamlessness at the time of array creation.

    To resolve the issue, we have introduced a feature in Array Builder, which will enable users to disable the Auto-Zoom functionality, if they wish to.

    Graphical user interface, application, website  Description automatically generated

  8. Performance Improvement for the Enphase Installer Portal

    The performance issues are observed in the Systems page the Enphase Installer Portal. The performance improvements are made to enhance the user experience of the Enphase Installer Portal.

Enphase Installer Portal release notes (22.3.0)
June 8, 2022

What’s new?

We are always working to improve and simplify your experience with Enphase. Below, you will see detailed information about the features and changes we have introduced to make installation and monitoring faster, easier, and more streamlined for our Installers.

 

Enphase product name changes

As part of the recently announced series of name changes across our entire product line, in this release, you will start to see the new names show up within our web application.

The following table highlights the key changes and updates that were introduced with this release.

Old Name New Name
Encharge IQ Battery
Enpower IQ System Controller
Envoy IQ Gateway
IQ Commercial Envoy IQ Commercial Gateway
IQX Microinverter IQ8 Microinverter
Encharge PCU IQ Battery PCU
Envoy Gateway Gateway
IQ Combiner IQ Combiner (no change)
Envoy-R/ Envoy-S Envoy-R/ Envoy-S (no change)
IQ8X Microinverter IQ8X Microinverter (no change)
Q Relay IQ Relay

 

 

Training Dashboard Enhancements

A new and more detailed Training Dashboard has been released for our installer partners to track the training status for each course taken through Enphase University at both the user and company levels.

  • Installers will be marked as Enphase certified once they have completed both the installation certification process and design certification training (design certification is assessed at a user level rather than at the company level).

  • Installer admins will now be able to see user and company status for all associated branches/divisions/subsidiaries.

 

System Dashboard for all system types

The Installer Portal System Dashboard was originally designed specifically for troubleshooting battery/storage systems. With this release, the System Dashboard has been modified to support all relevant system configurations including:

  1. PV + Storage:
    Microinverters + Gateway + IQ Battery + IQ System Controller + Meters + Other wireless devices

  2. PV only in case of IQ8PV:
    Microinverters + Gateway + IQ System Controller + Meters + Other wireless devices

  3. PV + Storage for EMEA:
    Microinverters + Gateway + IQ Battery + Meters + Other wireless devices

  4. PV + Storage + Generator:
    Microinverters + Gateway + IQ Battery + IQ System Controller + Meters + Generator + Other wireless devices

  5. String Inverter + IQ Battery:
    String inverter + Gateway + IQ System Controller + IQ Battery + Meters + Other wireless devices

 

System dashboard for storage systems:

EISP_2230_7.png

System dashboard for PV only system:

EISP_2230_8.png

Reverse CT Polarity

Installers will now be able to swap CT polarity directly from the production/consumption summary page.

  1. For a single-phase system, an installer can easily reverse polarity immediately, directly from within the page.

  2. For a multi-phase system, a commercial installer will have to select the specific lines/levels (L1, L2, L3) for which they want to reverse the polarity.

  3. After selecting the specific lines, polarity will be reversed for those lines (and those lines only).

  4. A message will now be shown on the production/consumption summary page if the polarity has been reversed by an authorized user.

EISP_2230_9.png

EISP_2230_10.png

What’s been fixed?

Certification status after the completion of the design course now works properly

In previous versions, even after companies/users completed our Enphase design review course material, the certification flag was not enabled, which prevented Installers from starting the commissioning process. This is now fixed so that the certification flag is enabled correctly.

Entire array deletion from array builder

There was previously an issue reported for Array Builder, where the user was not able to delete the entire array all at once. Only deletion of a single panel within the array was working. As part of this update, this issue has been resolved. Users will now be able to delete the entire array by simply clicking on the delete button after selecting the entire array.

Portuguese translations on the registration page

Some of the information on the Portuguese version of our installer registration pages was not translated accurately in previous releases. As part of this release, we have updated and corrected these mistranslations.

Updating emails with product name changes

Previously, emails sent from the Enphase Cloud to end-users included references to the term Enlighten. These have all been changed to the new name, Enphase Installer Portal.

Sender details, along with the subject line and content in all emails have been updated in accordance with the new naming system.

Enphase Installer Portal release notes (22.2.0)
March 30, 2022

What's new?

We’re always trying to improve your experience. Here are the features we introduced to make installation and monitoring gets faster, easier, and better.  

Authorized subcontractor

Installers will be able to add an authorized subcontractor who will have access to sites created by the installer right from stage 1.

  • Installers will have access to the Authorized subcontractor page from under the Account section in Enphase® Installer Portal (Enlighten Manager)
  • Installers will have to add user email ID from the subcontractor company to add the company as an authorized subcontractor
  • After an authorized subcontractor is added the installer can then assign them sites from the Activation page
  • Installers will have the ability to enable/ disable an authorized subcontractor, but this will not remove the subcontractor’s access to a particular site. Installers must remove the access from the Activation page, if required
  • An authorized subcontractor will not be able to change the access settings for a site
  • An authorized subcontractor will be able to see the list of sites which it has access to on the activation page
  • An authorized subcontractor will be able to see the list of sites which it has access to on the systems page right from stage 1 of commissioning
  • An authorized subcontractor shall be able to edit/ update the site they have access to in the activation page
  • Current behavior of sending homeowner consent email from stage 4 and 5 will be followed for any authorized subcontractor that is given access to the site
  • Same authorized subcontractor cannot be added twice by an Installer
  • If an authorized subcontractor is selected in given access to a site and the same access is given as a third part company at a time, authorized subcontractor access should be considered as priority
  • If an authorized subcontractor is given access to a site, when displaying company name in system access page show ‘Authorized subcontractor’ in the bracket after the company name

EIP_2220_1.png

EIP_2220_2.png

EIP_2220_3.png


 

Training dashboard enhancements

Training dashboard (Enphase® Installer Portal ((Enlighten Manager)) only) will be accessible for Installers in the US and LATM locations only.

Installers will be blocked on commissioning IQ8 systems based on the training status of below learning paths. Each learning path contains various courses that the user needs to complete to get certified in that learning path:

Either:

  • IQ8 Installer certification training

Or:

  • IQ Combiner 4 , and

  • IQ8 System and Technology, and

  • IQ system controller 2


 

Company performance scorecard for all installers

Company performance scorecard was earlier accessible to only EIN (Enphase Installer Network) members. Going forward all Installer Admins will be able to see the company performance dashboard in their Enphase® Installer Portal (Enlighten Manager) dashboard.

EIP_2220_4.png


 

Mandatory T&C to add new users for privacy purpose

To add a new user, an Installer shall have to tick the check box with the following text:

"Only the system owner may provide access to their site. Without written approval from the system owner, installers may not provide access to other companies and may not provide access to users outside of their company. I have read and agree to Enphase’s Terms of Service and have read Enphase’s Privacy Policy. I understand that violation of these conditions may result in suspension or termination of my Enlighten (Enphase® Installer Platform) account."

EIP_2220_5.png


 

New Products for Labor Claim Process

As part of the Labor Claim Process, in accordance with a new requirement, 2 new SKUs of IQ™ Gateway (IQ Envoy) are being supported. These are as follows:

  • XA-ENV-PCBA-3-Part Number-800-00555-r03 (IQ™ Gateway (IQ Envoy))

  • ENV-IQ-AM1-240-Part Number-800-00555-r03 (IQ™ Gateway (IQ Envoy))

This new requirement is being supported in this release. Due to this change, once RMA is being raised, Labor Reimbursement Process will also be supported for the above-mentioned SKUs.

EIP_2220_6.png


Load Control Scheduled Mode (24 Hour Enhancements)

Keeping up with incremental feature enhancements in Load Control with every release, in this release, we have introduced the ability to support 24-hour window for Support Modes in Load Control. Apart from the obvious restrictions that start time should be earlier than end time, and the existing restriction that end time should be at least 15 minutes greater than the start time, all other restrictions have been done away with. As stated earlier, 24-hour selection will be permitted in case of Scheduled Mode within Load Control.

EIP_2220_8_1.png        EIP_2220_8_2.png
                  Before                                                                                After

NMI Field Check in Australia

As part of this release, NMI Field Check performed earlier for only the state of South Australia is being expanded to include all the states in the Australian Region. Additionally, few validations around the NMI field are being included in this release in case the user enters any invalid input/ junk value.

  • For residential systems, the checksum should be numeric, and the length should be 10 or 11 characters. In case of violation, appropriate error message will be shown to the user.

  • For commercial systems, the checksum can be alphanumeric, and the length should be 10 or 11 characters. In case of violation, appropriate error message will be shown to the user.

EIP_2220_9.png

EIP_2220_10.png


 

O&M – 3G Cell Modem Replacement

Installers can opt-in for Pronto services to replace 3G cell modems on homeowner behalf.

  1. Installers will have access to 3G cell modem sites page from Systems page

  2. Installer will get to see all 3G modems which require modem replacement

  3. Installer can click on ‘Replace with Pronto’ and provide their consent to share homeowner sites to Pronto so that homeowners can be contacted to replace the modems

EIP_2220_11.png

EIP_2220_12.png

EIP_2220_13.jpg

EIP_2220_14.png

EIP_2220_15.png


 

What’s fixed?

  1. Users are now getting OTP email upon registration. Earlier, there were cases reported that user was not getting OTP during registration.

    System owners now receiving account activation emails when the installers give access to their systems. Earlier, a change made in Enphase® Installer Platform (Enlighten) to send account activation email in stage 3 has affected the functionality of sending account access by installers.

  2. New PV only system getting into ‘Meter not reporting’ issue is fixed and working normal now. A change made for storage system with string inverters to make production readings default to meter measurements had affected PV only systems as well.
  3. Reserved SOC and SOC values are now not shown up for PV only systems in Systems page. Earlier, as the database stores default SOC values for all systems had affected the values that are shown up to installers.
  4. Installers are now able to save the array details once the array info is edited and saved within ‘Settings’ page. This is caused due to the change in external PVWatts calculator that is used to calculate estimated energy production.
  5. System map now shows all the locations correctly within map view of Systems page. Earlier, the locations were not shown correctly as the libraries were broken.
  6. New cell modem plan dates are updated correctly when it replaces the old cell modem. It was not updated correctly before as it referred to old cell modem plan dates.
Enphase Installer Portal release notes (22.1.0)
February 7, 2022

What’s new?

We’re always trying to improve your experience. Here are the features we introduced to make installation and monitoring gets faster, easier, and better.

Load control enhancement

  • In this release, we have made changes as per the new requirements for the scheduled mode in the newly released Load Control. Earlier, the scheduled mode allowable time range was between 9AM-4PM.

  • In this release, we have made the changes for the allowable scheduled mode limit to be between 7AM-8PM. The default range still continues to be between 9AM-4PM. However, when user changes this default range and selects anything between 7AM-8PM, it is allowed, albeit with the following error message. “Make sure PV production at the selected time range can meet your load demand, else it may result in microgrid collapse”.

  • If the user selects anything not between 7AM-8PM, they will be shown the following error message, ““Start Time and End Time should be within 07:00 AM and 08:00 PM.”

    Picture1.png

 

Notification preferences old vs new view toggle

  • Users will be able to switch between the old and new view of notification preferences with a toggle switch

  • Performance improvement has also been taken care

    iamage2.png

 

Training dashboard enhancements

  • Users will be able to see their ensemble certification status on the Enlighten Manager dashboard. The status of certification will be enabled only if at least one of the users from the user’s company has completed the Ensemble installation training and Design certification course

  • We are also adding the following flags in Enlighten based on the courses completed by the installers. Based on the flag we will restrict corresponding commissioning in ITK app:

    • PCS Certified Installer -> Power Control Systems (PCS) for Enphase

    • Generator Certified Installer -> Enphase Storage Generator Support

    • Load Control Certified Installer -> Load Control for Enphase Storage

      iamage3.png

 

US Virgin Islands moved to State in the US

  • In the upcoming Enlighten release, US Virgin Islands is being changed to a state within the United States as per the new requirements.

  • Till now, it was listed as a separate country in Enlighten. Any impact on time zones, RMA documents, grid profiles will be handled as part of this change.

  • Like what was done for Puerto Rico earlier, users will be given the option to add latitude and longitude details while adding address details for a system located in USVI.

 

Ensemble related fields in Enlighten Systems Page

In the upcoming release, following changes have been made for Ensemble Related Fields in Enlighten Manager.

  • Users will now be able to see Reserved SOC, SOC, Storm Guard Status and Charge from Grid Status information in the systems page for Ensemble sites. These will be visible to the user not by default, but only when he chooses these columns after clicking on the change column option

  • Searching and sorting capability of this information will be available to the users

    iamage4.png

 

Labour Reimbursement Process in new Geographies

  • Based on the request from various installers and the Enphase Sales Team, the labor reimbursement process has been made available for India and Poland.

  • The tenure for labor reimbursement has been kept the same as in the US, i.e., 2 years.

  • The amount for labor reimbursement has been set as follows in India.

    • Rs 2000 ($26.82) each truck roll to a site for performing removal and replacement of defective Eligible Product

    • Rs.600/ micro ($8.02/micro) for each defective Eligible Product that is replaced at that site (same truck roll)

  • The following IRF form, along with a scanned copy of PAN, GST and cancelled cheque needs to be uploaded to avail this facility in India.

    iamage5.png

  • For Poland, the rules have been kept same as other EMEA regions where this facility is available.

 

Send Homeowner Activation email in Stage 3

In the upcoming release, Homeowners will start getting account activation emails in stage 3 instead of stage 4. This will help to avoid situations that used to happen earlier when the installers would leave the homeowner location even before emails were received. This would result in no guidance for the Homeowners to activate or use the application.

PowerDash availability in new states

Enphase had partnered with PowerDash earlier to meet SREC (Solar Renewable Energy Certificate) reporting requirements. This facility was only available in the states of Massachusetts and New Hampshire. As part of this release, this new feature is being introduced in the states of California, Connecticut, Delaware, District of Columbia, Illinois, Indiana, Kentucky, Maine, Maryland, Michigan, North Carolina, New Jersey, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia and West Virginia.

This will enable reporting using PowerDash tool for systems located in these states. The option can be seen in the system settings page and needs approval from the homeowner before being used like before.

iamage6.png

What’s fixed?

  1. The background image in array builder is being shown immediately within android version of ITK once uploaded. Earlier the image was not shown immediately.

  2. ACM partners are now being able to upload ACM data with ACM admin portal. Earlier, the system was throwing error without allowing users to upload the data.

  3. In auto scanning feature of array builder, if one microinverter is assigned to a module, the same won’t be allowed to assign in another module. “Microinverter already assigned to different panel” message is shown to a user. Earlier, array builder allowed user to assign same microinverter to many panels at a time.

  4. Correcting Encharge and System Status based on actual Encharge status

    • Encharge is not reporting for more than 2 days but Enlighten shows the status as ‘Normal’. In this case, Enlighten will check if the Encharge has reported within 24hrs. If not, the Encharge status will be changed to ‘Battery not reporting’. Once Encharge starts reporting, the status will be moved back to ‘Normal’.

    • Encharge is reporting correctly but Enlighten shows both the system and Encharge status as ‘Battery not reporting’. In this case Enlighten will clear all the associated alarms of Encharge and audit log for the same will be added.

    • All 4 Encharge PCUs are not reporting but Enlighten shows Encharge status as ‘Normal’. Enlighten will check if the all the Encharge PCUs are reporting. If not, the status of Encharge will be changed to ‘Battery Issue’ stating that ‘All Battery PCUs are not reporting’.

    • Partial number (<4) of Encharge PCUs are not reporting but Enlighten shows Encharge status as ‘Battery Issue’. Enlighten will check if the all the Encharge PCUs are reporting. If not, the status of Encharge will be changed to ‘Battery Issue’ stating that ‘# Battery PCUs are not reporting’.