アプリとソフトウェア

What’s New 

For all Enphase App users: 

1. Profile icon enhanced on STATUS page:

   Enhanced the PROFILE change option on the STATUS page.

   

For Enphase App users with IQ PowerPack 1500:

1. Low battery events available in Event History and Push Notification

   Added option to view low battery information in Event History and receive push notifications on demand.

What’s fixed

1. Resolved issues affecting telemetry data accuracy.
2. Fixed the issue where Microinverters Not Reporting status is displayed even when they are reporting.
3. Improved password change flow on My Information page to clearly show errors and prevent confusion or loading issues.
4. Resolved Live Status access over Connect Locally on secondary gateways in multi-gateway sites with batteries.
5. [For IQ PowerPack 1500 users] Fixed an issue where wrong date was displayed in Status page.
6. [For IQ PowerPack 1500 users] Fixed an issue where updated site name wasn’t shown on Live Vitals page in offline (BLE) mode.
7. [For IQ PowerPack 1500 users] Resolved display issues in dark mode.

What’s new

For Enphase App users with IQ PowerPack 1500:

1. Event History updates

   Added new events and updated existing ones in the Events History.

What’s fixed

1. [For IQ PowerPack 1500 users] Fixed an issue where the device was not updating during SyncPulse.
2. [For Electric Water Heater users in France] Updated the power rating limit from 10 kW to 20 kW and the capacity limit from 500 L to 1,000 L.
3. [For Electric Water Heater users in France] Fixed an issue where the HEAT NOW button was shown even when the water heater was running. 

What’s New 

For IQ EV Charger users in Europe 

1. Full Backup support for IQ EV Chargers

   Added support for selecting all Charging Modes under the Full Backup profile. 

   

2. Default Charging Modes for different profiles

   Updated default Charging Modes for IQ EV Chargers: Green Charging for Self-Consumption and Full Backup, Smart Charging for AI Optimization.

3. Authentication details in EV charger sessions report

   Added Authentication details in EV charger sessions report to indicate how each session was authenticated. 

   

What’s Fixed

1. Fixed an issue where the Custom Energy page was not loading for some users.
2. Resolved a date selection issue on the Custom Energy page for older iOS versions.
3. Fixed an issue where signal strength was incorrectly shown as zero for older microinverters on the Array page.
4. Resolved display issues on the Menu page in dark mode for Samsung S25 users.
5. Fixed an issue where a few users were unable to change their system profile settings.
6. [For IQ EV Charger users] Fixed an issue that caused an incorrect Not Charging reason to appear on the Status page. 
    

What’s Fixed

[For IQ PowerPack 1500 users] Fixed an issue where users in Puerto Rico were unable to complete registration due to address validation errors.

What’s new

For all installers:

1. Added microinverter and battery microinverter model number to Grid Profile Settings report

   The users shall now be able to view the following additional information in the Grid Profile Settings report under the Reports tab:

   • For Microinverters:
      
     • Model Number
   • For Battery Microinverters:
      
     • Model Number
     • IQ Battery Serial Number

   

   

2. Added more noise types as part of the PLC noise graphs

   To help users assess whether a site needs a noise filter or not, the following types of PLC noise shall be visible to the users under the PLC Noise Detection tab of the System Dashboard:

   • Idle
   • Transmitted
   • Received
   • Now

   

What’s fixed

1. Fixed the issue of users being unable to raise another request for the Transfer of Ownership if a payment failed.
2. Resolved the issue of the user’s last preference not being honored for the Systems view.
3. Fixed the issue of Signal Strength, which was incorrectly shown as zero for older microinverters on the Array View tab and Array Builder.

What’s Fixed

For Enphase App users in France with Electric Water Heater

The Electric Water Heater (EWH) integrates seamlessly with the IQ Energy Router, enabling real-time monitoring, smart control and optimization of water heater based on energy availability and cost.

1. Enhanced monitoring and control: 
    
   • Real-time monitoring of energy consumption and heating status via Live Status and Live Vitals features.
   • Detailed telemetry and historical data for better insights into energy usage and savings on the Energy Page.
   • Electric Water Heater device details on the Devices page.

   • Heat Now option on Status and Live Status page for immediate heating.

      

     

2. Energy optimization and advanced controls
    
   • Water heater consumption aligns with active profile (AI Optimization or Self Consumption) with various heating mode settings:
   • Green Heating: Utilizes excess solar power to heat water, reducing grid dependency.
   • Smart Heating: Optimizes heating schedules based on dynamic tariffs and energy consumption patterns.

   • Scheduled Heating: Allows users to set custom heating schedules, including off-peak times to minimize costs.

     

      

     

What’s Fixed

For all Enphase App users:

1. Simplified access to cookie preferences.

What’s Fixed

1. [For IQ EV Charger users] Fixed the issue that prevented creating a new IQ EV Charger only site.

What’s new

For all Enphase App users:

1. Opt-out for critical alerts:

   Added OPT OUT for critical storm alerts as well.

   

For IQ EV Charger users in NA and EU:

1. Enhanced IQ EV Charger connectivity flow:

   Enhanced IQ EV Charger Wi-Fi configuration to show a warning for weak connections.

   

For IQ EV Charger users in Europe:

1. Charging schedule now available on STATUS page:

   Added charging schedule details on STATUS page when the IQ EV Charger is set to Smart Charging mode.

   

What’s Fixed

• Optimized the notification delivery time for critical system updates.
• Fixed blank STATUS page when the gateway hasn’t reported for a few hours.
• Resolved the issue of the Environment card showing zero value for non-English locales.
• [For IQ PowerPack 1500 users] Resolved discrepancy between slider values in the app and the device LCD for “Power Save After” and “Power Off After” settings.
• [For IQ PowerPack 1500 users] Added a cancel button in the Wi-Fi Networks screen when no networks are available.
• [For IQ EV Charger users in Europe] Fixed the issue that prevented EV charging on some sites when IQ EV Charger was in Smart Charging mode.

What’s new

For all installers:

1. Added filters to the parameters that were missing from the System List

   Some parameters in the System List did not have filtering capability until now. Now, users can filter these parameters:

   1. Issue Count
   2. Owner Email
   3. System Size
   4. Current Power
   5. Operational
   6. Interconnection Date
   7. % of estimated (month)
   8. % of estimated (lifetime)

What’s fixed 

1. Fixed the issue of incorrect translations in the IQ Relay Self Test report for the Italian locale shown under the Reports tab.

What’s Fixed

For all Enphase App users:

• Updated microinverter not reporting logic to notify users only when 10% or more of microinverters are not reporting.

What’s new

For all Enphase App users:

1. Enhanced gateway connectivity feature

   Users are now shown a warning message if they select a weak Wi-Fi network while configuring Wi-Fi for their gateway.

   

What’s Fixed

For all Enphase App users:

• Bug fixes and minor enhancements.

What’s new

For Enphase App users on Smart Solar Billing plan in Illinois:

1. Updated Electricity Rate Settings

   Users can add and view their Hourly Dynamic Prices by selecting their Utility and Rate Name. Go to Menu > Settings > Electricity Rate

   

2. Updated Battery Settings

   Users can set their batteries to charge from grid or discharge to the grid as per the battery mode set during system commissioning by the installer. Go to Menu > Settings > Battery

   

3. Update Site Details

   Users can view their grid connection details: Connection Type, Connection Year and Battery Mode. Go to Menu > System > Site Details

   

What’s fixed

For all IQ EV Charger users in North America and Europe

• Resolved an issue preventing Green charging from working for certain users.
• Fixed a bug that was causing Off-Peak schedules to be disabled in specific cases.

What’s new

For Enphase App users in the United States: 

1. We have added Red Flag Warnings to the list of weather alerts that activate the Storm Guard feature. The updated list is more closely focused on the alerts that most commonly cause grid outages.

What’s new

For all Enphase App users:

1. New FAQ on how to check that a system is functioning normally 

   We have added a new FAQ entry with easy-to-follow instructions on how to monitor your system’s health and performance, control your devices remotely, and identify and address any potential issues. Navigate to Menu > Support > Browse all FAQs to see all the FAQs.

What’s fixed

• Enhanced the Microinverter not reporting logic to notify users whenever even just one microinverter is not reporting or producing.
• Fixed an issue that prevented Low Solar Production notifications from being delivered to users.
• Addressed an issue where changes to the system name were not updated immediately.
• Enhanced the System Owner’s Guide links to be displayed according to the system's location and locale. Navigate to Menu > Support > Refer system owner’s guide to view.