Documentatiecentrum
Datasheets, technische instructies, certificeringsdocumenten en meer.
What’s new
For Enphase App users with third-party inverters on NEM 3.0 (Net Billing Tariff) in California, or on dynamic tariffs in Belgium, Germany, and Netherlands:
AI Optimization profile is now available
The app now supports the AI Optimization profile for systems with third-party inverters and IQ Batteries. This profile maximizes financial savings based on electricity rates, consumption patterns, and expected solar production. AI Optimization should be selected if the user’s main energy goal is saving more money on utility bills. This feature will be slowly rolled out to users.
For Enphase App users on dynamic tariffs in Belgium, Germany, and Netherlands:
New video tutorial on system profiles
A new video tutorial on system profiles is now available in the app. Go to Menu > Settings > Profile to watch.
What’s fixed
- Addressed the issue of inconsistent carbon footprint units in the app and in email notifications.
What’s new
For Enphase App users with IQ Batteries:
Option to opt out of ongoing storm alerts
You will now be able to Opt Out of individual storm alerts without disabling the Storm Guard feature.
You can also navigate to Menu > Settings > Profile > Storm Guard to opt out of ongoing alerts.
- When a storm alert is issued, you can opt out if you so choose.
- If you opt out, your system profile will be immediately restored to its previous profile.
- Opting out of a storm alert allows your battery to continue discharging to support home loads if you feel discharging is more important than preparing the battery for a potential grid outage.
- After opting out from an ongoing alert, you have an option to Opt In again from the Storm Guard page.
Storm Guard auto-activation for critical alerts
To safeguard your system from blackouts caused by battery depletion, Storm Guard will be automatically activated for critical alerts that have a high chance of causing grid outages.
This activation will occur even if the Storm Guard feature had been previously disabled in the app. If Storm Guard is disabled, it will only be activated for the duration of the critical alert. The Opt Out option is not available for critical alerts.
What’s fixed
- Resolved a delay issue in storm alert activation and deactivation for IQ Battery sites in the United States.
- Fixed Event History messaging for storm alerts with a missing end time.
- Corrected the Energy page tags to display correct alert names when multiple alerts are active on the system.
- [For NEM 3.0 and dynamic tariff users] Updated the optimization algorithm to use the site's grid export and import limits for optimal performance.
- [For NEM 3.0 users] Addressed issues where the user’s selection for the Discharge battery to the grid state was not being honored.
What’s new
For all installers:
Added the ability to view warranties for select devices
Installers can now view the warranties of some Enphase devices under the Devices tab.
The devices include:
- IQ Gateways
- IQ System Controller
- IQ Batteries
- Microinverters
What’s fixed
- Addressed the issue of not being able to provision devices from the System Dashboard.
- Resolved the problem of SMS notices not being sent to users.
- Fixed the issue of being unable to download Commissioning Logs CSV from the System Dashboard.
IQ Gateway software version 8.2.4382 supports discharging batteries to the grid via third-party devices for grid-tied systems with IQ8, IQ7, or M Series Microinverters or third-party string inverters along with the IQ Battery 3T/10T or IQ Battery 5P.
- Gateways supported: IQ Gateway Metered, IQ Gateway Standard
- Countries: All European countries except Ireland, Italy, and the United Kingdom
- Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
- Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries (ACB)
- Supported system configurations:
- General supported configurations for all European countries:
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
- Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Belgium, France, Luxembourg, and Netherlands:
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
- Austria, Belgium, Denmark, France, Germany, Greece, Netherlands, Portugal, Spain, Sweden, and Switzerland:
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
- General supported configurations for all European countries:
# | Feature | Description |
1 | Enables Discharge to Grid via local APIs | Supports discharging from batteries to the grid by IQ Gateway local APIs called by third-part devices while adhering to regional compliance requirements. |
2 | Bug fixes | Addresses the issue of production loss and AC disconnect (phase imbalance management, or PIM) events at the time of initialization and grid profile propagation. |
This release is being deployed via remote software upgrades for all systems.
IQ Gateway software version 8.2.4264 supports grid-tied systems with IQ8 Series Microinverters, IQ7 Series Microinverters, M Series Microinverters, or third-party string inverters along with the IQ Battery 3T/10T, IQ Battery 5P, or AC Batteries in Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands.
- Countries: Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands
- Gateways supported: IQ Gateway Metered, IQ Gateway Standard
- Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
- Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries
- Supported system configurations:
- Belgium, France, Netherlands, and Luxembourg
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
- Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered / IQ Gateway Standard
- Germany
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
- Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Great Britain
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied solar only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Grid-tied solar only systems with M Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
- Belgium, France, Netherlands, and Luxembourg
Feature | Description |
Bug fixes and security enhancements | Fixes the issue of mismatching between the data from microinverter measurement and the meters, leading to the erroneous appearance of underproducing microinverters. |
This release is being deployed via remote software upgrades for all systems.
The following known issues have been observed in IQ Gateway software version 8.2.4264:
Known issues:
Issue | Description |
The Enphase Installer App does not support commissioning of the IQ Battery 5P to existing Solar Only sites with gateway software version 7.6.358 in Belgium, France, Luxembourg, and Netherlands | The IQ Battery 5P is not supported with software version 7.6.358, and the Enphase Installer App cannot upgrade the system to version 8.2.86 which is needed to commission an IQ Battery 5P. Activity to upgrade all Solar Only sites to 7.6.358 to 8.2.4225 is in progress. If such a site is encountered, installers should inform Enphase Support to remotely upgrade the site to software version 8.2.4225 before installing and commissioning an IQ Battery 5P. |
What’s new
For all Enphase App users:
Support for SunPower migrated sites
For relevant SunPower sites, you can now see system migration details by navigating to Menu > System > Site Details. Learn more about the support Enphase is providing to SunPower System Owners.
Renamed String Inverter page and added panel information
Along with the inclusion of Panel information, we have renamed the String Inverter page to Third Party Inverter in the Devices section.
What’s new
For all installers:
Improved battery mode selection
Battery mode selection is now part of the System Information page. This will reduce the time spent by technicians in the field.
Wiring verification for battery mode changes
When changing the Battery Mode from Import Only to Export Only, installers will be shown instructions to verify the main load panel wiring.
Ability to add device serial numbers before gateway serial numbers
Installers can now add serial numbers for IQ Microinverters and Q/IQ Relays without entering a gateway serial number, which provides greater flexibility and convenience.
Warning for unusual breaker sizes in PCS sites
A warning will appear on the PCS Based Limiting page if an installer selects an uncommon breaker size (0-15 A) in the Main Panel Upgrade Avoidance and IQ Battery Oversubscription sections.
Aggregate Power Export Limit setting in the Configuration section
Installers now have the ability to directly select the Aggregate Power Export Limit (PEL) on the PCS Based Limiting page of the Configuration section, if available for the geography.
What’s fixed
For all installers:
- Other bug fixes and improvements.
What’s new
For all installers:
- Consumption meter validation
- While enabling a consumption meter, the Enphase Installer App will check if the production readings are captured correctly in the production meter for different consumption meter locations (Load with solar or Load only).
- If a wiring error is detected, installers will be blocked from enabling the consumption meter and instructed to fix the error.
- Ability to enable consumption meters in low light conditions
- Installers will be allowed to enable consumption meters even in low light conditions with low solar power production.
- Production meters cannot be enabled with erroneous phase configuration
- Installers will be blocked from enabling a production meter when they mistakenly select a three-phase site configuration as single-phase instead of three-phase.
For installers in the United States commissioning Off-Grid only sites:
- Enphase Installer App now allows Off-Grid only commissioning
- Installers will be allowed to commission Off-Grid Enphase Energy Systems.
- Installers are required to complete training to perform the wiring and commissioning of Off-Grid configurations. Click here to access the required training
- Learn more about the Enphase Off-Grid offering for homeowners who want a clean, resilient, and self-sufficient grid-independent energy supply.
For installers in Europe commissioning IQ Energy Routers:
- IQ Energy Router improvements
- The Enphase Installer App will automatically establish communication between the IQ Energy Router and the IQ Gateway when an old IQ Gateway is replaced with a new IQ Gateway.
- The new IQ Gateway should be connected to the same network as the IQ Energy Router.
What’s fixed
- Performance improvements and other fixes.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
What’s new
For all installers:
- Faster power production during commissioning
- Microinverters will start producing power within 5 minutes, but every microinverter will produce at a reduced rate.
After generating the summary report, Microinverters will be rebooted once they receive the necessary configurations, and normal operation will be resumed.
- Enhanced CT validation
- Improved checks for zero production and CT location issues across all phases.
- Added new import reduction checks for more accurate system readings.
- Improved IQ Gateway connectivity
- New Connect now and Disconnect now options have been added for easier IQ Gateway management.
There is also an option to disconnect from AP mode for steps requiring internet connectivity.
Streamlined IQ EV Charger connectivity
The process for connecting an IQ EV Charger to the IQ Gateway has been optimized, with clearer steps and improved error handling.
Detection of missing microinverters
Added a check to ensure all PV branch circuits are properly measured before enabling the consumption meter.
Added System Access information
System Access details have been added to the Services section for each site.
For installers in Brazil:
Mandatory use of IQ Relay
Starting in November 2024, an IQ Relay will be mandatory for all new system installations in Brazil to comply with warranty requirements.
For installers in India:
IQ Relay importance notification
There is a new notification emphasizing the importance of adding an IQ Relay for warranty coverage. If an IQ Relay is not used, warranties may be void.
For installers in Europe commissioning IQ Energy Routers:
- IQ Energy Router improvements
- Added support for commissioning IQ Energy Routers with solar-only systems in countries with IQ Energy Management.
- Streamlined the process for IQ Energy Router addition and activation.
What’s fixed
- Enhanced checks for zero production and CT location issues have been implemented to ensure accurate system readings.
- Enhanced detection and guidance for polarity issues in split-phase sites.
- Removed the 500 W production requirement warning in CT setup.
- Various minor bug fixes and performance improvements.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
What’s new
For Enphase App users on dynamic tariffs in Belgium, Germany, and Netherlands:
Total and spot price rates now shown on Electricity Import Rate page
Dynamic tariff customers can now view both Total and Spot price (inclusive of taxes and fixed charges) rates on the Electricity Import Rate page.
What’s fixed
- Resolved a custom report date selection issue in the Enlighten web view for small-screen devices.
- Improved inconsistent header sizes on different screens of the app.
- Fixed an issue of homeowners with access to multiple systems not being able to switch between systems on the app.
What’s new
For installers:
- Added the ability to simultaneously view production data from microinverters and the production meter under the Graph tab
- Under the Graph tab, installers can now choose to simultaneously view production data from microinverters and the production meter for individual systems.
- Installers can select Production (Meter) or Production (Microinverters) in the Select View Option drop-down in the Graph tab to view both at the same time.
What’s fixed
- Addressed the issue of low State of Charge (SoC) emails being sent to installers for on-grid systems.
- Resolved a problem of systems showing minor meter issues which are not persistent and are caused by external irregularities such as voltage or frequency.
- Fixed the issue of an empty System List page being displayed in the Fleet Dashboard.
What’s new
For Enphase App users with IQ EV Chargers in the United States and Canada:
Option to create a new charger-only site for existing Enphase customers
You can now confirm the site address before commissioning an IQ EV Charger. There is also an option to create a new IQ EV Charger-only site if the charger is installed at a different address than an existing Enphase site.
Option to refresh Wi-Fi list
You can now refresh the list of Wi-Fi networks while commissioning an IQ EV Charger, and also while reconfiguring Wi-Fi from the Connectivity settings of your IQ EV Charger within the app.
For Enphase App users with IQ EV Chargers in territories of the United States:
Support for IQ EV Charger features in U.S. territories
Users in the following U.S. territories can now commission, control, and monitor IQ EV Chargers using the Enphase App to benefit from its full range of EV charging features.
- Puerto Rico
- Northern Mariana Islands
- Guam
- American Samoa
What’s fixed
- Corrected the problem of duplicate notifications being issued when a storm alert is triggered.
- Resolved an issue related to dynamic tariff features [AI Optimization profile and electricity rates] not showing for Solar Only systems in Belgium and Netherlands.
What’s new
For all installers:
Change in System Type, permitting, and PV Module details
The Enphase Installer App will require installers to update the System Type, permitting, and PV Module details in Step 1 (System Details) of the commissioning process.
It is recommended that site creation (Step 1) be completed using the new activation form in the Enphase Installer Portal.
Note: Support for the classic activation page will be removed in the coming weeks.
Ability to create an array without scanning microinverters
Installers will now be able to create an array for an Enphase system before scanning microinverters. Alternatively, installers can access the Array Builder from the IQ Microinverters details screen.
For installers in North America:
Support for Busbar Overload Control in Main Panel Upgrade Avoidance
Installers will be able to enable and configure Busbar Overload Control inside Main Panel Upgrade Avoidance, in addition to the Current Limit with NEC 120% Rule.
For installers in Australia and New Zealand:
Option to skip meter wizard steps for backup system commissioning
Installers will be allowed to skip the Production Meter and Consumption Meter sub-steps in the validation step if they are commissioning a backup system with an IQ System Controller INT.
What’s fixed
- Implemented other performance improvements and bug fixes.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
What’s new
For Enphase App users on NEM 3.0 (Net Billing Tariff) in California:
1. Added system profile tutorial video
The Profile page now includes a new video tutorial explaining how homeowners can maximize the benefits of their system by choosing the system profile that best suits their needs. The tutorial includes an introduction to the new AI Optimization profile that helps automatically maximize bill savings under NEM 3.0.
What’s fixed
For Enphase App users on NEM 3.0 (Net Billing Tariff) in California:
1. Resolved issues related to changing the system profile from Self-Consumption to AI Optimization.
2. Fixed issues that caused excess solar energy produced by the system to be curtailed instead of exported.
3. Resolved issues in which the Discharge battery to the grid window was not being set in the Self-Consumption system profile.
What’s new
For installers in the United States:
- Enhancements on the Fleet Dashboard for easier use
- Filters can now be individually applied below each sub-category of filters.
- Filters can also be applied by pressing the Enter button.
- The System List tab has been positioned to the left of the Overview tab, and is now the default landing page when navigating to the Fleet Dashboard.
What’s fixed
- Resolved an issue of the Missing Branch Circuits test failing on a few systems when Production CT health checks are initiated.
- Fixed the issue of per-phase battery charge and discharge not being visible on the graph after the battery is retired.
IQ Gateway software version 8.2.4225 is for grid-tied systems with IQ8 Series, IQ7 Series, and/or M Series Microinverters or compatible third-party string inverters along with the AC Battery or IQ Battery 3T/10T or IQ Battery 5P in Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands. This release supports the dynamic tariff (DT) feature for Belgium and Netherlands, and the discharge to grid (DTG) feature for Great Britain.
- Gateways supported: IQ Gateway Metered, IQ Gateway Standard
- Countries: Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands
- Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
- Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries (ACB)
- Supported system configurations:
- Belgium, France, Netherlands, and Luxembourg
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and ACB
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and ACB
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and ACB
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and ACB
- Grid-tied solar-only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied solar-only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied solar-only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Great Britain
- Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
- Grid-tied solar-only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied solar-only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Grid-tied solar-only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
- Belgium, France, Netherlands, and Luxembourg
# | Feature | Description |
1 | IQ Battery 5P support | Supports grid-tied solar and storage systems with IQ8 or IQ7 Series Microinverters or third-party string inverters and IQ Battery 5P in Belgium, France, Luxembourg, and Netherlands |
2 | Dynamic tariff (DT) support | Supports dynamic tariff configuration in Belgium and Netherlands to optimize system behaviour for maximum savings |
3 | Discharge to Grid (DTG) support | Supports discharge to grid functionality in Great Britain to increase monetary benefit for homeowners by exporting excess energy to the grid during high export rate periods |
4 | Security update | Software security feature updated |
5 | Bug fixes |
|
This release is being deployed via remote software upgrades for all systems.
The following known issues have been observed in IQ Gateway software version 8.2.4225:
Known issues:
# | Issue | Description |
1 | IQ7 under-production is being erroneously displayed after updating the gateway software | With IQ7 Series Microinverters, there is an error in the last reported time stamp, thereby displaying a reduced power production value in the Enphase App. There is no issue observed in actual production. The display issue will be fixed in upcoming software releases. |
2 | Enphase Installer App doesn’t support commissioning of IQ Battery 5P to existing solar-only sites with gateway software version 7.6.358 in France, Netherlands, Belgium, and Luxembourg | IQ Battery 5P is not supported with the software version 7.6.358 and Enphase Installer App cannot upgrade the system to the 8.2.86 version which is needed to commission IQ Battery 5P. The activity to upgrade all solar sites to 7.6.358 to 8.2.4225 is under-going. If there is such a site in the field, installer should inform Enphase customer care to remotely upgrade the site to 8.2.4225 before installing and commissioning an IQ Battery 5P at the site. |
What’s new
For all installers:
1. Preventing duplicate site creation
We have updated the New Activation Page to help installers avoid creating duplicate sites.
This enhancement is crucial as it prevents data loss in existing sites caused by the creation of duplicate sites during system expansion, storage addition, or site upgrades under the Enphase Upgrade Program.
2. New voltage and phase information for commercial sites
If a commercial site is in either Australia, New Zealand, India, or South Africa, the 230 V Three-Phase option will be shown in the Electrical Parameters field.
If a commercial site is in the United States or Canada, the following options for Electrical Parameters will be shown:
- 208 WYE/120 V Three-Phase
- 240/120 V Single-phase
- 208 V Single-phase
What’s fixed
For all installers:
1. Other bug fixes and improvements.
What’s new
For installers in the United States:
Additional information is now provided in the Systems list on the Fleet Dashboard
Installers can now view the following additional columns in the Systems list:
- Issues
- Financing Type
- Cell Modem
- Cell Modem SKU Type
- Cell Modem Plan End Date
- Grid Status
- Storm Guard Status
- Charge From Grid Status
- Battery Profile
- Reserved SOC
- SOC
- Utility Name
- Rate Name
- Import Plan Name
- Export Plan Name
- Grid Connection Type
- Grid Connection Year
- Battery Operating Mode (NEM 3.0)
- IQ Battery Type
- IQ System Controller Type
- Grid Services Program Name
Also, installers can now select None to filter columns with missing information.
Added the ability to generate Yearly Production and Consumption reports from Fleet Dashboard
Installers can now generate Systems Yearly Production and Consumption reports from the Reports tab. This report provides energy production and consumption for all of the installer’s systems during the specified years.
Reports tab in the Systems section of the Fleet Dashboard
Select the Systems Yearly Production and Consumption report
Select the years for which the report is required
The report is then sent as an email
Email sent, containing the report as an attachment
What’s fixed
- Resolved the issue of the PV array not being saved despite all the requisite information being provided.
- Fixed the incorrect location of the Consumption Current Transformer (CT) on the Load with Solar production configuration.
- For installers in Italy, resolved the issue of the Enphase Installer Portal showing only wide-band, and not narrow-band, test data for self-test reports with IQ Relay 2.0 and 1.3.4 firmware.
- Updated the system statuses for Enphase EV Chargers and third-party EV chargers:
Current system statuses | Updated system statuses |
EVSE Not Reporting | EV Charger Not Reporting |
EVSE Faulted | EV Charger Faulted |
IQ Energy Router EVSE Not Reporting | EV Charger Not Reporting |
What’s new
For Enphase App users on NEM 3.0 (Net Billing Tariff) in California with IQ Batteries, and users with IQ Batteries on dynamic tariff or time-of-use rates in Belgium and Netherlands:
Introduced new system profile called AI Optimization to help maximize savings
For any NEM 3.0 system in California, as well as systems on dynamic tariff or time-of-use rates in Belgium and Netherlands, we have added a new system profile called AI Optimization. Replacing the former Savings profile, it maximizes financial savings based on electricity rate, consumption pattern, and expected solar production. This profile should be selected if the user’s main energy goal is saving more money on utility bills.Exporting to the grid in the Self-Consumption profile for NEM 3.0 systems
For users on NEM 3.0 who prefer to keep their system profile set to Self-Consumption, and for whom the Battery Mode is Export only, the Discharge battery to the grid feature will be available to benefit from high export rates, especially during the months of August and September.Whenever the profile is switched to Self-Consumption, the Discharge battery to the grid feature will be auto-enabled. Once enabled, the discharge time window will be automatically set based on the user’s set tariff. If the tariff is missing, the discharge time window will be identified using the NEM 3.0 rates available at the user’s location based on ZIP code.
Users with their battery in Export only mode can navigate to Menu > Settings > Battery to enable or disable the Discharge battery to the grid feature.
Updated list of storm alerts and events to improve Storm Guard coverage
We have updated the list of alerts and storm events that activate the Storm Guard feature.The updated list is more closely focused on the events that most commonly cause grid outages, thus improving the accuracy of Storm Guard activations.
The following events have been added to Storm Guard monitoring:
Flood Watch Tornado Watch Typhoon Warning Hurricane Watch Tropical Storm Watch
The following event has been removed from Storm Guard monitoring:Radiological Hazard Warning
What’s fixed
- Resolved issues with low battery charge notifications while the system is off-grid.
- Reduced size and improved resolution of top navigation icons for better user experience.
What’s new
For all installers:
More intuitive site search screen
We have revamped the site search screen of the Enphase Installer App. The improvements are:
a. The new and more intuitive site search screen allows installers to quickly and easily find the sites they need to work on.
b. Installers will see the systems recently worked on at the top of the list, ensuring quick access to current sites without the need for searching.
Enhanced details in the Consumption CT wizard
Installers will now be able to see PV production readings along with consumption readings in the Consumption CT wizard. This will facilitate faster diagnosis in case of wiring errors.
Enhanced troubleshooting for Enphase Control Cable wiring
If provisioning fails for an IQ System Controller 3/INT or IQ Battery 5P in a 3rd-generation Enphase Energy System, the app will now provide additional troubleshooting steps to ensure proper wiring of the Enphase Control Cable.
Multi-gateway commissioning improvement
We have improved the progress bar for multi-gateway systems to show accurate progress in both AP mode and non-AP mode.
Commissioning alerts in low light conditions
Installers will receive an alert highlighting potential issues when attempting to commission a system in low light conditions, such as after sunset.
Validation details in Summary Report
The Summary Report now includes validation details, showing Complete status when validation has been attempted and successfully passed.
For installers in North America:
Merged IQ Gateway software
Multiple IQ Gateway software versions have been consolidated into a single bucket, reducing the software download size in the Enphase Installer App.
Added non-backup storage commissioning for 208 V sites
The app now allows grid-tied storage commissioning for sites with 208 V grid connections.
Enabled installation of excess PV in third DER port
Installers will now be allowed to install excess PV in the third DER port for backup-only storage configurations.
Permission to Operate (PTO) details on System Details page
In Step 1 (System Details), installers can now indicate if PTO has been received. Based on the input given, installers will be shown steps to disable solar and batteries as necessary or applicable.
[California] Interconnection Application Date now required
Installers now need to provide the interconnection application date when indicating that PTO has been received.
[California] Setting Battery Mode for NEM 3.0 sites
Installers can now set the battery mode for a NEM 3.0 site. They can choose between the Import Only and Export Only options on the battery mode selection page. Installers will have seven days to modify or rectify the battery mode selection, after which the option to change will be disabled.
For installers in Europe and the Middle East:
Disabled PLC scan for cross-communication
Multiple IQ Gateway software versions have been consolidated into a single bucket, reducing the software download size in the Enphase Installer App.
Functional Validation for IQ Energy Router associated devices (EV chargers and heat pumps)
In countries where the IQ Energy Management is available, installers will have an option to validate if associated peripherals like EV chargers and heat pumps are communicating and working properly.
What’s fixed
For all installers:
Error codes for Enphase system software update failures
When an Enphase system software update fails, installers will now see the corresponding error codes. These codes can be referred to Enphase Support for better issue identification.
Improved AP mode connection performance
The performance of the AP mode connection in the Gateway Connectivity page has been enhanced.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
What’s new
For all Enphase App users:
Enphase Support now directly accessible from the Status page
Contact details for Enphase Support are now directly accessible on the Status page, and the Contact us screen has been enhanced to provide support details at the top.
Added a new FAQ entry, Providing access to a new system maintainer, to ease the process of adding a new company to maintain or service your system.
For Enphase App users with an IQ System Controller:
Grid outage banner added on Status page
You can now see grid outage banner, titled System is Off Grid, on the Status page. This banner includes Enphase Support details and a link to a support article to better respond to an outage.
What’s fixed
- Corrected an issue of storm alerts not ending for some sites even when an alert is ended.
- Resolved issues with low battery charge notifications while the system is off-grid.
- Addressed the issue of the custom report date selector not working.
- Fixed an issue of the app not loading for sites where one of the gateway is not reporting.
- Resolved issues with support links not redirecting to the correct country’s Enphase Support pages.
- Fixed issue of users not able to log in due to a Too many active sessions error.
- Corrected an issue of the range on the EV charger device card on the Status page and EV session history always shown in miles, even when metric unit system is selected.
- Fixed the issue of the Wi-Fi network name not being updated after reconfiguring Wi-Fi on an IQ EV Charger.
What’s new
For Enphase App users in the United Kingdom with an IQ Battery:
New feature to discharge the energy stored in the IQ Battery to the grid
You can now schedule your battery to discharge to the grid, allowing you to benefit from high energy export rates.
To enable battery discharging:
a. Go to Menu > Settings in the Enphase App.
b. Select Battery.
c. Turn on the Discharge battery to the grid toggle, then set your desired start and end times.
Find more detailed instructions in this Enphase Support article.
For Enphase App users in Belgium and the Netherlands:
Launched new Savings system profile featuring AI-powered support for Dynamic Tariff and Time of Use rates
You can now further minimize your electricity bill by using the new AI-powered Savings profile that supports Dynamic Tariff and Time of Use rates.
To enable the new Savings profile:
a. Set your electricity rates by navigating to Menu > Settings > Electricity Rate.
b. Then, activate the AI-powered Savings profile by navigating to Menu > Settings > Profile.
For more details, refer to these guides for homes in Belgium or homes in the Netherlands.
What’s new
For Enphase App users in California:
-
To simplify choosing the right rate plan on the Electricity Rate page, we now show only applicable rates based on system connection type—i.e. NEM 1.0/2.0 (net metering) or NEM 3.0/NBT (net billing).
What’s fixed
-
Resolved issues related to Storm Guard activation during active storm alerts.
-
Fixed issues linked to Charge Battery from the Grid not working for a few multi-gateway sites.
What’s new
For all Enphase App users:
Added warranty details for Enphase devices
In the Enphase App, warranty details are now available for microinverters, batteries, the IQ System Controller, and the IQ Gateway.
This feature will be gradually rolled out to all users.To view your warranty information, navigate to Menu > System > Devices, then click the blue warranty link.
For Enphase App users with multiple gateways supporting Live Status:
Individual and aggregate data support for multi-gateway systems
On the Live Status page, you can now view the Live Status for each gateway, as well as an aggregated view for all gateways. This feature will be gradually rolled out to all users.
What’s fixed
- Addressed issues with erroneous battery reserve events shown in Events History.
- Corrected issues related to missing historic data on the Energy page.
- Resolved display flickering issues while loading the Energy page.
- Fixed the Rate Us feature not redirecting to Google Play Store for Android devices.
What’s new
For installers in countries with Enphase Home Energy Management:
1. Added new devices to the Devices page
On the Devices page, installers can now view device details for the new devices that are integrated into Enphase Home Energy Management, including the IQ Energy Router, EV chargers, and heat pumps.
New device details for EV chargers and heat pumps
2. Added consumption data for heat pumps and EV chargers in the Graph view
In the Graph view, installers can now see consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.
New device consumption data in the Graph view
3. Added consumption data for heat pumps and EV chargers to the Reports page
On the Reports page, installers can now view consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.
New device reports in the Reports section
4. Added new system statuses to indicate new device errors
Installers can now view the following system statuses on the Systems page to identify issues related to new devices integrated into Enphase Home Energy Management.
• IQ Energy Router Not Reporting
• IQ ER EVSE Not Reporting
• Heat Pump Not Reporting
• Heat Pump Error
What’s fixed
1. Resolved the issue of Meter Measurements not being enabled by default, even though CTs were enabled on a system.
2. Resolved the issue of system statuses being incorrectly switched between Meter Issue and Normal within a short time.