What’s new

For all Enphase App users:

1. New FAQ on how to check that a system is functioning normally 

   We have added a new FAQ entry with easy-to-follow instructions on how to monitor your system’s health and performance, control your devices remotely, and identify and address any potential issues. Navigate to Menu > Support > Browse all FAQs to see all the FAQs.

What’s fixed

• Enhanced the Microinverter not reporting logic to notify users whenever even just one microinverter is not reporting or producing.
• Fixed an issue that prevented Low Solar Production notifications from being delivered to users.
• Addressed an issue where changes to the system name were not updated immediately.
• Enhanced the System Owner’s Guide links to be displayed according to the system's location and locale. Navigate to Menu > Support > Refer system owner’s guide to view.

What’s new

For all installers:

1. Added an EV Charger option under the Company Profile Installation Details section
   • Installers can now indicate whether they support EV chargers in the Services Offered menu of the Installation Details section of the Company Profile page.
   • Installers will see the EV Charger checkbox to the right of the existing Solar, Storage, Roofing, and Electrical options.

What’s fixed 

1. Resolved the issue of the Array Builder not allowing IQ8 Microinverters to be added with other microinverters on multi-gateway systems.
2. Updated the logic behind the Meter Issue system status.
3. Removed the training flag for legacy solar certification from the Company Scorecard.
4. Addressed an issue of incorrect warranties being displayed for replacement devices.

What’s new

For all installers:

1. Enhancements to post-commissioning steps
    

   • The Enphase Installer App will collapse the commissioning steps after commissioning is complete, making the Monitor and Service menus more prominent.

     

2. Interactive demo guide 
    
   • The new App Demo card in the Support section provides access to an interactive guide that demonstrates the features and workflows of the Enphase Installer App.

   • This includes configuration-specific demos for different markets, helping installers learn the basic functions of the app.

     

3. Enhanced microinverter communication status
    

   • A near real-time (3-5 minutes) grid-voltage display for each microinverter is now provided to verify that the wiring is done correctly.

     

4. Automatic gateway software updates
    

   • A mandatory gateway software auto-download is triggered when logging into the Enphase Installer App. This ensures the latest gateway software is available for commissioning.

     

For installers in North America:

1. Support for Net Metering in Illinois
    
   • For installers commissioning sites in Illinois, the Enphase Installer App will allow them to Select Grid Connection Type.

   • Installers can access a guide that helps them select the correct grid connection type.

      

2. Mandatory gateway software upgrade for gateway replacement
    
   • The Enphase Installer App will suggest mandatory gateway software upgrades during the IQ Gateway replacement process if the replaced gateway is on a higher version than the new gateway.
3. Commissioning California 208 V sites with IQ Battery 5P 
    

   • In California, installers can now commission the IQ Battery 5P on sites with single-phase 208 V, i.e., 120 V L-N, 208 V L-L, and a 3-wire grid supply.

     Note: The IQ Battery 5P operates as a non-backup or grid-tied battery on single-phase 208 V supplies. It should not be mistaken for a three-phase 208Y/120 V 4-wire supply, as the IQ Battery 5P does not support 208Y/120 V 4-wire supplies.

4. Busbar Overload Control for Main Panel Upgrade Avoidance (MPUA)
    
   • Installers will now have an additional software option called Busbar Overload Control on the Main Panel Upgrade Avoidance page.

   • This control allows installers to accurately control the charge and discharge of the IQ Batteries based on the component size of the main panel.

     

5. IQ8P Microinverter (IQ8P-72-2-US) commissioning in Mexico 
    
   • The IQ8P Microinverter is incompatible with three-phase residential and commercial sites using 220Y/127 V 4-wire grid supply in Mexico. The Enphase Installer App will block the addition of IQ8P Microinverters for such systems.

For APAC and EMEA installers:

1. The Enphase Installer App will support connections with utility servers in South Australia and Victoria.

2. Automatically select the consumption phases in the consumption meter wizard when the installer chooses and activates the three-phase production meters.

   

For IQ EV Charger installations:

1. Improved EV charger integration
    
   • Installers can now integrate EV chargers in the Enphase Energy System and validate their functioning using the Enphase Installer App.
2. Main Breaker Trip Avoidance (MBTA)
    
   • Installers can now enable and configure dynamic load balancing and prevent the main breaker from tripping by limiting the IQ EV Charger capacity during usage.

What’s fixed

1. Improved battery readiness detection during functional validation.
2. Updated PLC noise measurement units for better accuracy.
3. Performance enhancements and stability fixes.

This release is being deployed via Google Play (Android) and App Store (iOS) upgrades.

What’s new

1. Introduced a Share option on the Array page 

   You can now share a snapshot of the Array page by tapping the Share icon highlighted below. This feature allows you to easily capture the content of the page and share it with others. 

    

   

What's fixed

1. Fixed the issue with streaming Live Status in offline mode.
2. Resolved issues with Share functionality on the Status and Energy pages.
3. Fixed the issue where animations on web pages are not working when opened from the app.

What’s new

For all installers:

1. Ability to update PTO status after commissioning

   Installers now have the flexibility to update the PTO (Permission to Operate) status after a system has been commissioned. This new capability allows for better control over enabling and disabling both solar and storage systems, based on the specific site configuration.

   3rd-generation system:

   

   1st- or 2nd-generation system:

   

   PV only:

   

2. Improved activation page and inventory management

   The Device Inventory and Select Grid Profile sections are now more intuitive. A clearer device count section has been added, ensuring easy adjustments for site setups. Grid profiles are also clickable, allowing for streamlined navigation.

    
   

3. Soft migration to New Activation Page

   To support a smoother transition to the New Activation Page, we’ve introduced a confirmation step for installers who choose to switch back to the Classic Activation view. This enhancement helps highlight the benefits of the new activation process while giving installers control over their preferred interface.

   Key updates:

   Confirmation pop-up for Classic Activation view

   • When installers attempt to switch to the Classic Activation view, they will now see the following confirmation message:

     

   • If installers choose to switch to the Classic Activation view, the system will remember this preference, ensuring that they continue using Classic Activation in future sessions.

4. Enhanced keyboard usability in the Details section

   Key updates:

   • When the Tab key is pressed, the cursor now automatically moves to the next field, making it easier to complete forms quickly.
   • When a drop-down menu is opened, the cursor will automatically move to the input field, allowing for faster selection and smoother navigation.

For installers in Australia:

1. Support for CSIP/IEEE 2030.5 compliance

   Installers now have the option to configure new sites for IEEE 2030.5 compliance, ensuring adherence to regional utility requirements.

   Key features:

   • IEEE 2030.5 interface selection for applicable regions

     For sites located in Queensland, South Australia, Victoria, or Western Australia, installers must now indicate if the site has an IEEE 2030.5 interface. This is a mandatory field to ensure compliance.

   • Region-specific utility provider selection

     If Yes is selected for Does the site have IEEE2030.5 Interface, a drop-down menu appears, allowing the installer to choose the appropriate utility provider based on the site’s region:

   

For installers in North America:

1. Confirmation for non-NEM 3.0 grid connection types

   To help installers avoid compliance issues, we’ve introduced a confirmation step for selecting non-NEM 3.0 grid connection types. This new feature prompts installers to verify grid connection dates, ensuring alignment with regulatory requirements.

   

For installers in Netherlands:

1. Microinverter quantity restrictions for IQ Combiner Lite gateways

   For sites in Netherlands using the Envoy S Standard EU (IQ Combiner Lite) gateway, there are now specific limits on the number of IQ Microinverters allowed per IQ Combiner Lite to ensure reliable performance.

   

What’s fixed

For all installers:

1. Other bug fixes and improvements.

IQ Gateway software version 8.2.4265, as part of factory-built gateways, supports grid-tied systems with IQ8 Series, IQ7 Series, and/or M Series Microinverters or third-party string inverters along with the IQ Battery 3T/10T, IQ Battery 5P, or AC Batteries.

• Gateways supported: IQ Gateway Metered and IQ Gateway Standard

• Countries: Albania, Austria, Australia, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, India, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Malaysia, Mauritius, Namibia, Netherlands, New Caledonia, New Zealand, Philippines, Poland, Romania, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, Great Britain, and Vietnam

  #	Feature	Description
  1	IQ Battery 5P support	The factory-built gateways will support grid-tied solar and storage systems with IQ8/IQ7 Series Microinverters or third-party string inverters and IQ Battery 5P in Belgium, France, Great Britain, Italy, Luxembourg, and Netherlands.
  2	Dynamic tariff (DT) support	The factory-built gateways will support dynamic tariff configurations in Belgium, Germany, and Netherlands to optimize system behavior for maximum savings.
  3	Discharge-to-grid (DTG) support	The factory-built gateways will support discharge-to-grid functionality in Germany and Great Britain to increase monetary benefit for homeowners by exporting excess energy to the grid at times with high export rates.

• Microinverters supported: IQ8 Series, IQ7 Series, M Series, and compatible third-party string inverters
• Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, and AC Batteries
• Supported system configurations:  
   
  • Belgium, France, Great Britain, Italy, Luxembourg, and Netherlands:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
  • Austria, Switzerland, Germany, France, Belgium, Netherlands, Spain, Portugal, Denmark, Sweden, and Greece:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
  • For all supported countries:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard

This release is being deployed via the factory for new gateways.

What’s new

For Enphase App users with third-party inverters on NEM 3.0 (Net Billing Tariff) in California, or on dynamic tariffs in Belgium, Germany, and Netherlands:

1. AI Optimization profile is now available

   The app now supports the AI Optimization profile for systems with third-party inverters and IQ Batteries. This profile maximizes financial savings based on electricity rates, consumption patterns, and expected solar production. AI Optimization should be selected if the user’s main energy goal is saving more money on utility bills. This feature will be slowly rolled out to users.

For Enphase App users on dynamic tariffs in Belgium, Germany, and Netherlands:

1. New video tutorial on system profiles

   A new video tutorial on system profiles is now available in the app. Go to Menu > Settings > Profile to watch.

What’s fixed

1. Addressed the issue of inconsistent carbon footprint units in the app and in email notifications.

What’s new

For all installers:

1. Added the ability to view both Enphase and third-party microinverters on the same system
   • For systems that have both Enphase and third-party microinverters, installers are now able to view both types of microinverters under the Devices tab.
   • The sections appear as below under Devices:
      
     • Microinverters
     • Third Party Inverters
     • 

What’s fixed 

1. Resolved an issue of users not being able to search comma-separated system IDs in the System List.
2. Addressed an issue of Enphase Installer Network-specific links being shown to installers where EIN is not applicable.

What’s new

For installers in the United States:

1. Added a link to view EV charger incentives and rebates

   The Services section now has a link to our EV Charger Rebates and Incentives Tool. This allows installers to quickly access the easy-to-use tool on the Enphase website that shows rebates, tax credits, and other EV charging incentives available in specific locations.

   

2. Enabled Labor Protection Program in New York and Oregon

   • Installers in New York and Oregon can now enroll systems under the Labor Protection Program in the Services section.
   • All systems with IQ Microinverters can be seen under the Eligible Sites toggle.
   

What’s fixed

1. Resolved an issue of phase data not being available for more than 14 days in the Graph section.
2. Addressed an issue of owner emails being appended with special characters on redirection.
3. Fixed a problem of system status not being synced with the System List on the Fleet Dashboard.

What’s new

For Enphase App users with IQ Batteries:

1. Option to opt out of ongoing storm alerts

   You will now be able to Opt Out of individual storm alerts without disabling the Storm Guard feature. 

   
    

   You can also navigate to Menu > Settings > Profile > Storm Guard to opt out of ongoing alerts.  

   
    

   • When a storm alert is issued, you can opt out if you so choose.  
   • If you opt out, your system profile will be immediately restored to its previous profile.  
   • Opting out of a storm alert allows your battery to continue discharging to support home loads if you feel discharging is more important than preparing the battery for a potential grid outage.  
   • After opting out from an ongoing alert, you have an option to Opt In again from the Storm Guard page.  

2. Storm Guard auto-activation for critical alerts  

   To safeguard your system from blackouts caused by battery depletion, Storm Guard will be automatically activated for critical alerts that have a high chance of causing grid outages.  

   This activation will occur even if the Storm Guard feature had been previously disabled in the app. If Storm Guard is disabled, it will only be activated for the duration of the critical alert. The Opt Out option is not available for critical alerts. 

   

What’s fixed

• Resolved a delay issue in storm alert activation and deactivation for IQ Battery sites in the United States.
• Fixed Event History messaging for storm alerts with a missing end time.
• Corrected the Energy page tags to display correct alert names when multiple alerts are active on the system.
• [For NEM 3.0 and dynamic tariff users] Updated the optimization algorithm to use the site's grid export and import limits for optimal performance.
• [For NEM 3.0 users] Addressed issues where the user’s selection for the Discharge battery to the grid state was not being honored.  
   

What’s new 

For all installers: 

1. Added the ability to view warranties for select devices

   Installers can now view the warranties of some Enphase devices under the Devices tab.

   The devices include:

   • IQ Gateways 
   • IQ System Controller 
   • IQ Batteries 
   • Microinverters

 What’s fixed 

1. Addressed the issue of not being able to provision devices from the System Dashboard. 
2. Resolved the problem of SMS notices not being sent to users. 
3. Fixed the issue of being unable to download Commissioning Logs CSV from the System Dashboard. 

IQ Gateway software version 8.2.4382 supports discharging batteries to the grid via third-party devices for grid-tied systems with IQ8, IQ7, or M Series Microinverters or third-party string inverters along with the IQ Battery 3T/10T or IQ Battery 5P.

• Gateways supported: IQ Gateway Metered, IQ Gateway Standard 
• Countries: All European countries except Ireland, Italy, and the United Kingdom
• Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
• Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries (ACB)
• Supported system configurations:
   
  •  General supported configurations for all European countries:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
  •  Belgium, France, Luxembourg, and Netherlands:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P  
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P 
  • Austria, Belgium, Denmark, France​, Germany, Greece, Netherlands​, Portugal​, Spain, Sweden​, and Switzerland:
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T 

This release is being deployed via remote software upgrades for all systems. 

 IQ Gateway software version 8.2.4264 supports grid-tied systems with IQ8 Series Microinverters, IQ7 Series Microinverters, M Series Microinverters, or third-party string inverters along with the IQ Battery 3T/10T, IQ Battery 5P, or AC Batteries in Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands.

• Countries: Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands 
• Gateways supported: IQ Gateway Metered, IQ Gateway Standard
• Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
• Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries
• Supported system configurations:  
   
  • Belgium, France, Netherlands, and Luxembourg   
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P 
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P 
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P 
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P 
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T 
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T 
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T 
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T 
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries 
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries 
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries 
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries 
    • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard  
    • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
    • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered / IQ Gateway Standard
  • Germany  
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
    • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
    • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
    • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered/IQ Gateway Standard 
  • Great Britain  
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
    • Grid-tied solar only systems with IQ7 Series Microinverters and IQ Gateway Metered/IQ Gateway Standard
    • Grid-tied solar only systems with M Series Microinverters and IQ Gateway Metered/IQ Gateway Standard 

This release is being deployed via remote software upgrades for all systems.  

The following known issues have been observed in IQ Gateway software version 8.2.4264: 

Known issues:

What’s new

For all installers:

1. Improved battery mode selection

   Battery mode selection is now part of the System Information page. This will reduce the time spent by technicians in the field.

   

    

2. Wiring verification for battery mode changes

   When changing the Battery Mode from Import Only to Export Only, installers will be shown instructions to verify the main load panel wiring.

   

    

3. Ability to add device serial numbers before gateway serial numbers

   Installers can now add serial numbers for IQ Microinverters and Q/IQ Relays without entering a gateway serial number, which provides greater flexibility and convenience.

   

    

4. Warning for unusual breaker sizes in PCS sites

   A warning will appear on the PCS Based Limiting page if an installer selects an uncommon breaker size (0-15 A) in the Main Panel Upgrade Avoidance and IQ Battery Oversubscription sections.

   

5. Aggregate Power Export Limit setting in the Configuration section

   Installers now have the ability to directly select the Aggregate Power Export Limit (PEL) on the PCS Based Limiting page of the Configuration section, if available for the geography.

   

   

   

What’s fixed

For all installers:

1. Other bug fixes and improvements.

What’s new

For all installers:

1. Consumption meter validation 
    
   • While enabling a consumption meter, the Enphase Installer App will check if the production readings are captured correctly in the production meter for different consumption meter locations (Load with solar or Load only).
   • If a wiring error is detected, installers will be blocked from enabling the consumption meter and instructed to fix the error.
2. Ability to enable consumption meters in low light conditions 
    
   • Installers will be allowed to enable consumption meters even in low light conditions with low solar power production.
3. Production meters cannot be enabled with erroneous phase configuration  
    
   • Installers will be blocked from enabling a production meter when they mistakenly select a three-phase site configuration as single-phase instead of three-phase. 

For installers in the United States commissioning Off-Grid only sites: 

1. Enphase Installer App now allows Off-Grid only commissioning 
    
   • Installers will be allowed to commission Off-Grid Enphase Energy Systems.  
   • Installers are required to complete training to perform the wiring and commissioning of Off-Grid configurations. Click here to access the required training  
   • Learn more about the Enphase Off-Grid offering for homeowners who want a clean, resilient, and self-sufficient grid-independent energy supply.

For installers in Europe commissioning IQ Energy Routers:  
 

1. IQ Energy Router improvements 
    
   • The Enphase Installer App will automatically establish communication between the IQ Energy Router and the IQ Gateway when an old IQ Gateway is replaced with a new IQ Gateway.
   • The new IQ Gateway should be connected to the same network as the IQ Energy Router. 

What’s fixed

1. Performance improvements and other fixes. 

This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.

What’s new

For installers:

1. Added the ability to simultaneously view production data from microinverters and the production meter under the Graph tab
    
   • Under the Graph tab, installers can now choose to simultaneously view production data from microinverters and the production meter for individual systems. 
   • Installers can select Production (Meter) or Production (Microinverters) in the Select View Option drop-down in the Graph tab to view both at the same time. 

What’s fixed

1. Addressed the issue of low State of Charge (SoC) emails being sent to installers for on-grid systems.
2. Resolved a problem of systems showing minor meter issues which are not persistent and are caused by external irregularities such as voltage or frequency.
3. Fixed the issue of an empty System List page being displayed in the Fleet Dashboard.

What’s new

For Enphase App users with IQ EV Chargers in the United States and Canada:

1. Option to create a new charger-only site for existing Enphase customers

   You can now confirm the site address before commissioning an IQ EV Charger. There is also an option to create a new IQ EV Charger-only site if the charger is installed at a different address than an existing Enphase site.

   

2. Option to refresh Wi-Fi list

   You can now refresh the list of Wi-Fi networks while commissioning an IQ EV Charger, and also while reconfiguring Wi-Fi from the Connectivity settings of your IQ EV Charger within the app.

   

For Enphase App users with IQ EV Chargers in territories of the United States:

1. Support for IQ EV Charger features in U.S. territories

   Users in the following U.S. territories can now commission, control, and monitor IQ EV Chargers using the Enphase App to benefit from its full range of EV charging features.

   • Puerto Rico
   • Northern Mariana Islands
   • Guam
   • American Samoa

What’s fixed

1. Corrected the problem of duplicate notifications being issued when a storm alert is triggered.
2. Resolved an issue related to dynamic tariff features [AI Optimization profile and electricity rates] not showing for Solar Only systems in Belgium and Netherlands.

What’s new

For all installers:

1. Change in System Type, permitting, and PV Module details

   The Enphase Installer App will require installers to update the System Type, permitting, and PV Module details in Step 1 (System Details) of the commissioning process.

   It is recommended that site creation (Step 1) be completed using the new activation form in the Enphase Installer Portal.

   

   Note: Support for the classic activation page will be removed in the coming weeks.

2. Ability to create an array without scanning microinverters

   Installers will now be able to create an array for an Enphase system before scanning microinverters. Alternatively, installers can access the Array Builder from the IQ Microinverters details screen.

   

For installers in North America:

1. Support for Busbar Overload Control in Main Panel Upgrade Avoidance 

   Installers will be able to enable and configure Busbar Overload Control inside Main Panel Upgrade Avoidance, in addition to the Current Limit with NEC 120% Rule.

   

For installers in Australia and New Zealand:

1. Option to skip meter wizard steps for backup system commissioning

   Installers will be allowed to skip the Production Meter and Consumption Meter sub-steps in the validation step if they are commissioning a backup system with an IQ System Controller INT.

What’s fixed

1. Implemented other performance improvements and bug fixes.

This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.

What’s new

For Enphase App users on NEM 3.0 (Net Billing Tariff) in California:

1. Added system profile tutorial video

The Profile page now includes a new video tutorial explaining how homeowners can maximize the benefits of their system by choosing the system profile that best suits their needs. The tutorial includes an introduction to the new AI Optimization profile that helps automatically maximize bill savings under NEM 3.0.

What’s fixed

For Enphase App users on NEM 3.0 (Net Billing Tariff) in California:

1. Resolved issues related to changing the system profile from Self-Consumption to AI Optimization.

2. Fixed issues that caused excess solar energy produced by the system to be curtailed instead of exported.

3. Resolved issues in which the Discharge battery to the grid window was not being set in the Self-Consumption system profile.

What’s new

For installers in the United States:

1. Enhancements on the Fleet Dashboard for easier use 
    
   • Filters can now be individually applied below each sub-category of filters.
   • Filters can also be applied by pressing the Enter button.
   • The System List tab has been positioned to the left of the Overview tab, and is now the default landing page when navigating to the Fleet Dashboard.

What’s fixed

1. Resolved an issue of the Missing Branch Circuits test failing on a few systems when Production CT health checks are initiated.
2. Fixed the issue of per-phase battery charge and discharge not being visible on the graph after the battery is retired. 

IQ Gateway software version 8.2.4225 is for grid-tied systems with IQ8 Series, IQ7 Series, and/or M Series Microinverters or compatible third-party string inverters along with the AC Battery or IQ Battery 3T/10T or IQ Battery 5P in Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands. This release supports the dynamic tariff (DT) feature for Belgium and Netherlands, and the discharge to grid (DTG) feature for Great Britain.

• Gateways supported: IQ Gateway Metered, IQ Gateway Standard
• Countries: Belgium, France, Germany, Great Britain, Luxembourg, and Netherlands
• Microinverters supported: IQ8 Series, IQ7 Series, M Series, compatible third-party string inverters
• Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, AC Batteries (ACB)
• Supported system configurations: 
   
  • Belgium, France, Netherlands, and Luxembourg 
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and ACB
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and ACB
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and ACB
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and ACB
    • Grid-tied solar-only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied solar-only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied solar-only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
  • Great Britain
     
    • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
    • Grid-tied solar-only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied solar-only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Grid-tied solar-only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard

This release is being deployed via remote software upgrades for all systems.

The following known issues have been observed in IQ Gateway software version 8.2.4225:

Known issues:

What’s new

For all installers:

1. Preventing duplicate site creation

We have updated the New Activation Page to help installers avoid creating duplicate sites.

This enhancement is crucial as it prevents data loss in existing sites caused by the creation of duplicate sites during system expansion, storage addition, or site upgrades under the Enphase Upgrade Program.

2. New voltage and phase information for commercial sites

If a commercial site is in either Australia, New Zealand, India, or South Africa, the 230 V Three-Phase option will be shown in the Electrical Parameters field.

If a commercial site is in the United States or Canada, the following options for Electrical Parameters will be shown:

• 208 WYE/120 V Three-Phase
• 240/120 V Single-phase
• 208 V Single-phase

What’s fixed

For all installers:

1. Other bug fixes and improvements.