Documentatiecentrum
Datasheets, technische instructies, certificeringsdocumenten en meer
Neem contact op met onze klantenondersteuning via https://enphase.com/contact/support.
Het RMA-proces is niet veranderd voor IQ8 Series. Het blijft hetzelfde als het proces voor IQ7, namelijk, (1) bel de Enphase-klantenondersteuning, of (2) start het RMA-proces via de Enphase App, Installer App of het Enlighten Platform.
Ja. De huidige IQ Gateway (zowel Metered als Standard) en IQ Relay (zowel multifase als monofase) werkt met IQ8 Series Microinverters.
EN50549-1, VFR 2019, IEC 62109-1/-2, IEC 61000-3/-6, IEC 50065-1/-2, EN55011
Ja. Kijk hier.
Nee.
Het installatieproces en de installatieprocedure zijn hetzelfde, maar de IQ8 Series Microinverters moeten met behulp van Installer App versie 3.28 of later in gebruik worden gesteld.
Nee.
Nee. Het combineren van IQ8 Series Microinverters met micro-omvormers van vorige generaties wordt niet ondersteund door IQ Gateway (Standard of Metered).
Nee. Het combineren van IQ8 Series Microinverters met micro-omvormers van vorige generaties wordt niet ondersteund door IQ Gateway (Standard of Metered).
Ja. Laat je systeemontwerp altijd beoordelen door ons Sales-/FAE-/klantenondersteuningspersoneel voordat je het systeem installeert of in gebruik stelt.
Ja.
25 jaar. Garantiedocument: https://enphase.com/installers/resources/warranty .
Ja.
Het informatieblad vind je hier.
A. In deze serie wordt de IQ8HC met 384 VA geïntroduceerd; dit type kan worden gekoppeld met PV-modules met een hoog wattage tot 530 W.
B. De IQ8MC, IQ8AC en IQ8HC Microinverters zijn voorzien van een hogere gelijkstroomcapaciteit van 14A, waardoor ze compatibel zijn met de nieuwe generatie PV-modules
Er zijn IQ8+, IQ8M, IQ8MC, IQ8AC- en IQ8HC Microinverters verkrijgbaar. De datasheets met alle specificaties vind je hier.
De datasheet is hier te vinden.
Neem contact op met onze klantenservice via www.enphase.com
There are no special instructions for microinverters with integrated MC4 connectors. Please follow the same installation practices as outlined in the Enphase installation manual.
No, there is no price difference between the microinverters that have integrated MC4 connectors and those that use adapter cables.
It doesn't use an external bulkhead adapter, so the overall cable is a bit less. However, module leads are typically 4 to 6 feet long, so the impact is minimal.
-
Installers can currently deploy Enphase solutions for three-phase electrical service customers utilizing the Enphase IQ7+, Q Cable and IQ Commercial Gateway. This provides a 208V three-phase solar PV solution compatible with 208V three-phase electrical main service panels and 480V electrical main service panels when the PV is connected to the low side of a 480-208 transformer. For locations requiring loss of phase detection. The Enphase Three Phase Network Protection Relay, which includes the IQ Commercial Gateway, offers loss of phase detection for sites that need it.
Yes, all microinverters will eventually have integrated MC4 connectors. We are gradually transitioning each inverter in a phased manner.
-
Yes, all system owners will utilize the same app, irrespective of system type. Owners with multiple systems can access all their Enphase systems from a single login to the Enphase App.
In the Enphase Installer Portal (formally known as Enlighten Manager):
1. Click on “Systems” tab
2. Select a system from the list
3. Click the “Devices” tab
4. The "Processor Load" column will show the existing firmware version
Microinverters with integrated MC4 connectors will not be shipped with a Q-DCC-2 adapter cable, as they are no longer necessary.