Centro de Documentos
Faça o download de datasheets, manuais de instalação, certificados e mais.
What’s new
For all Enphase App users:
-
Added warranty details for Enphase devices
In the Enphase App, warranty details are now available for microinverters, batteries, the IQ System Controller, and the IQ Gateway.
This feature will be gradually rolled out to all users.To view your warranty information, navigate to Menu > System > Devices, then click the blue warranty link.
For Enphase App users with multiple gateways supporting Live Status:
-
Individual and aggregate data support for multi-gateway systems
On the Live Status page, you can now view the Live Status for each gateway, as well as an aggregated view for all gateways. This feature will be gradually rolled out to all users.
What’s fixed
-
Addressed issues with erroneous battery reserve events shown in Events History.
-
Corrected issues related to missing historic data on the Energy page.
-
Resolved display flickering issues while loading the Energy page.
-
Fixed the Rate Us feature not redirecting to Google Play Store for Android devices.
What’s new
For installers in countries with Enphase Home Energy Management:
1. Added new devices to the Devices page
On the Devices page, installers can now view device details for the new devices that are integrated into Enphase Home Energy Management, including the IQ Energy Router, EV chargers, and heat pumps.
New device details for EV chargers and heat pumps
2. Added consumption data for heat pumps and EV chargers in the Graph view
In the Graph view, installers can now see consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.
New device consumption data in the Graph view
3. Added consumption data for heat pumps and EV chargers to the Reports page
On the Reports page, installers can now view consumption data for EV chargers and heat pumps that are integrated into a system through Enphase Home Energy Management.
New device reports in the Reports section
4. Added new system statuses to indicate new device errors
Installers can now view the following system statuses on the Systems page to identify issues related to new devices integrated into Enphase Home Energy Management.
• IQ Energy Router Not Reporting
• IQ ER EVSE Not Reporting
• Heat Pump Not Reporting
• Heat Pump Error
What’s fixed
1. Resolved the issue of Meter Measurements not being enabled by default, even though CTs were enabled on a system.
2. Resolved the issue of system statuses being incorrectly switched between Meter Issue and Normal within a short time.
What’s new
For all installers:
1. Added ability to reverse the polarity of Storage CTs
Installers can now navigate to the Storage CT page under Devices and click Reverse Polarity to reverse the polarity of the respective Storage CT.
2. Added the ability to make a few reports available immediately under the Reports section
Previously, users had to wait 24 hours for enough data to be collected to prepare a report. In this release, we have added the ability to make the below reports available immediately without waiting 24 hours:
· IQ Relay Self-Test Report
· Grid Profile Settings Report
· Microinverter Routine Test Report
For installers in the United States, Puerto Rico, and Canada:
The following products and their respective SKUs have been made eligible for labor reimbursement.
| S. No. | Product | SKU |
|---|---|---|
| 1 | IQ Combiner 5 | X-IQ-AM1-240-5 |
| 2 | IQ Combiner 5C | X-IQ-AM1-240-5C |
| 3 | IQ System Controller 3 | SC200D111C240US01 |
| 4 | IQ System Controller 3G | SC200G111C240US01 |
| 5 | IQ Battery 5 | IQBATTERY-5P-1P-NA |
| 6 | IQ Combiner 4 | X-IQ-AM1-240-4 |
| 7 | IQ Combiner 4C | X-IQ-AM1-240-4C |
| 8 | IQ Combiner 4 | X2-IQ-AM1-240-4 |
| 9 | IQ Combiner 4C | X2-IQ-AM1-240-4C |
What’s fixed
1. Fixed the issue of users not being able to select a device from search results in the Install Replacement section.
2. Fixed the issue of not showing System Controller Issue and Battery Issue system statuses in the System List.
3. Fixed the issue of showing non-relevant devices under the Devices tab of the system. Only those devices which are present in the system and reporting to the Enphase Cloud will be displayed to end users. The Devices tab will also consist of devices that had reported at least once for that particular system.
4. Relaxed the Array Builder validations so that both arrays can be built on the Array Builder for sites with both IQ8 Microinverters and other models of microinverters.
5. Updated Production CT health check logic to check for existing system status to provide recommendations.
What’s new
For all Enphase App users with microinverters:
-
Notification when microinverters in your system do not report
Whenever some of the microinverters in your system are not reporting, we will notify you via email, text message, or push message based on your notification preferences. This notification will be gradually rolled out to all users.
To adjust your notification preferences, navigate to Menu > Account > My Notifications.
For Enphase App users in the U.S. and Canada with IQ EV Chargers:
-
Additional details for IQ EV Charger on Live Vitals page
You can now see live Voltage and Current details for your IQ EV Charger, along with its live Power consumption, on the Live Vitals page.
-
Added IQ EV Charger energy consumption on the Energy page
In the Day view on the Energy page graph, you can now see a breakdown of energy consumption between your IQ EV Charger and the rest of the household. This breakdown is shown in the pop-up when you hover on the graph.
-
Added IQ EV Charger energy consumption for custom periods
You can now view details of your IQ EV Charger’s energy consumption for custom periods on the Energy page.
What’s fixed
-
Fixed the issue of not displaying Last reported date for some devices.
-
Fixed the issue of displaying erroneous battery charge and gateway connectivity events in Event History.
What’s new
For installers in North America:
-
New informational pop-up about IQ Battery 3T/10T wiring
We have added guidelines for the recommended wiring procedure for an IQ Battery 3T/10T.
These guidelines appear in a pop-up that also links to the latest IQ Battery 3T/10 quick install guide, as well as a short training video demonstrating best practices for IQ Battery 3T/10T wiring, if further instruction is needed.
The pop-up will be shown whenever an IQ Battery 3T/10T is scanned.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
What’s new
For Enphase App users in the U.S. with Commercial Enphase Energy Systems:
-
Commercial tariffs now available under Autofill section on Electricity Rate page
You can now choose the relevant Tariff for your Commercial system from the Autofill list.
To set your tariff structure, navigate to Menu > Settings > Electricity Rate > Autofill.
For Enphase App users in the U.S. and Canada with IQ EV Chargers:
-
IQ EV Charger consumption data and session history added to Reports page
You can now generate reports to access an IQ EV Charger’s consumption data and session history data.
To generate these reports, navigate to Menu > System > Reports.
-
Added details for Not Charging status of IQ EV Charger
You can now see the reason why your IQ EV Charger is not charging.
-
System status updated for users with standalone IQ EV Chargers
Errors for IQ EV Chargers are displayed on the Status page, and more details about these errors can be viewed on the Notices page.
To learn more about an error, tap on the error on the Status page.
What’s fixed
-
Resolved display issues for battery charge and discharge data on the Energy and Status pages.
-
Fixed issues with a system profile not being updated and stuck in a Pending state.
-
Addressed issues with the Not Reporting Range Extenders display on the Devices page.
What’s new
For all installers:
-
Added Service Manager link within the Installer Portal for easy access to a system
Installers can now navigate to a system within the Service Manager from the Installer Portal as a logged-in user by clicking Service Manager within the system view.
-
Added ability to set Dark Mode and remove images within the kiosk view
Installers can now set Dark Mode within the kiosk view as well as delete any uploaded images.
Option to enable/disable Dark Mode
Option to remove an image and save
-
Added a new SKU within the Microinverter Routine Test Report
Installers in Thailand need to generate a routine test report for the MEA and submit it to the local utilities for interconnection agreements. In previous releases, we added the ability for installers—within the reports section for an individual site—to generate a report for the IQ7 Microinverters in a system. In this release, the IQ8P Microinverter below is added to the report.
-
IQ8P-72-2-INT
-
What’s fixed
-
Fixed the issue of Thai fonts not being downloaded correctly within the reports downloaded from the Installer Portal.
-
Fixed the issue of legacy tariff editor not being available for ACB systems within the System Settings page.
-
Fixed the issue of wrong device statuses showing up for Wireless Range Extender or device statuses not showing at all.
What’s new
For all installers:
-
Added third-party storage device details in the System Details menu
We have added an option for installers to add details of third-party storage devices if used along with Enphase components.
Note: Enphase recommends using Enphase IQ Batteries along with Enphase microinverters for the best user experience.
What’s fixed
For all installers:
-
We have fixed an issue that caused IQ Gateway updates to start and fail multiple times in some conditions.
-
Improved app performance and other bug fixes.
This release is being deployed via Google Play (Android) or App Store (iOS) upgrades.
IQ Gateway software version 7.6.336 supports IQ7 Series and M Series Microinverters along with IQ Battery 3T/10T and AC Battery for Germany, Belgium, Austria, France, Netherlands, and Switzerland.
-
Gateways supported: IQ Gateway Metered
-
Countries: Austria, Belgium, France, Germany, Netherlands, Switzerland
-
Microinverters supported: IQ7 Series, M Series, third-party string inverters
-
Batteries supported: IQ Battery 3T/10T, AC Battery
-
Supported system configurations:
-
Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Battery
-
Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and AC Battery
#
Feature
Description
1
Bug fixes
-
Fixes the issue of multiple USB unplugged events observed in the Enphase Installer Portal.
-
Fixes the issue of microinverters, batteries, and other devices not reporting status by improving the Zigbee communication.
-
Fixes the issue of the Battery Management Unit (BMU) shutting down whenever the IQ battery is idle.
-
Fixes the issue of undesirable power consumption (tare loss) by the battery when in idle state.
-
Fixes the issue of IQ Battery maximum state-of-charge (SoC) being limited to 97% instead of 100%.
-
Fixes the issue of Phase Imbalance Management (PIM) getting enabled for single-phase systems.
This release is being deployed via remote software upgrades for all systems.
-
What’s new
For all installers:
-
Informing installers in case of multiple polarity reversal attempts for the same system
Installers will now be informed and asked for confirmation if they wish to proceed with the polarity reversal of any meter if the polarity of the same meter was reversed less than 24 hours before. This ensures that polarity reversal is not performed twice unintentionally, resulting in no change in polarity.
-
Added capability for installer company administrators to specify job roles at the time of new user creation
At the time of new user creation, administrators of installer companies can now specify the job role that the new user has within the installer company. For example, this may include roles such as Project Manager, Marketing/Sales, and Finance.
-
Added ability to hide installer name at the time of kiosk creation using the Fleet dashboard
We have implemented the ability to hide the installer company’s name and logo at the time of kiosk creation using the Fleet dashboard.
Option to enable or disable the installer name and logo:
Example of the kiosk interface when the installer name and logo are disabled:
-
Allowed access to view kiosks created by other users within the same company
Installer users will now be able to view kiosks created by other users belonging to the same company.
Bug fixes
-
Fixed the loss of per-phase consumption and per-phase production curves with IQ Gateway replacement.
-
Resolved language discrepancies for the reports section in French locale.
-
Renamed the System Configurator in the Quick Access section to System builder.
-
Added the Status Since column to the Fleet Status tab in the Fleet dashboard.
What’s new
For Enphase App users in the U.S. and Canada with IQ EV Chargers:
-
Off-Peak times now displayed on Add-on Schedules page
You can now view the off-peak charging schedule for charging your EV in the Off-Peak section of the Add-on Schedules page of the app.
To set add-on schedules for EV charging, navigate to Menu > Settings > EV Charger > Add-on Schedules.
-
IQ EV Charger details added to Live Vitals
You can view live data for your IQ EV Charger, such as connection status and the amount of power consumed, on the Live Vitals page.
To access the page, Navigate to Menu > System > Live Vitals.
For systems in the U.K. with an IQ Battery 5P:
-
Charge battery from the grid feature
You can charge your batteries from the grid once the IQ Gateway software has been updated to version 8.2.82 or above.
To access the Charge battery from the grid feature in the app, navigate to Menu > Settings > Battery.
What’s fixed
-
Resolved issues with Live Status for multi-gateway systems.
-
Addressed issues with generator on and off notifications.
-
Updated the Available Power values displayed in the app for systems with an IQ Battery 5P in the U.K.
What’s new
For all installers:
-
Added best practices for Zigbee site layout (applicable for IQ Battery 3/3T, 10/10T)
The app now provides recommendations for adding range extenders to an Enphase Energy System. Following these best practices can help reduce installation and troubleshooting times.
-
Added a reminder for breaker size details (applicable for IQ Battery 5P in North America)
We have added a reminder to installers if breaker size details have not been added, and provided guidance on how to add the necessary details.
For installers in Europe:
-
Added voltage checks
The Enphase Installer App will automatically check the voltage for all phases and show an error if the voltage is outside normal operating values (less than 20 V, or greater than 300 V) when using expert mode to enable the meters.
-
Added battery configuration check
The app will now restrict adding an AC Battery and an IQ Battery in the same system.
-
Training requirement for commissioning
The Enphase Installer App will block commissioning if the respective training is not completed for:
-
Grid-tied storage systems in the U.K.
-
Systems with an IQ Energy Router or IQ Energy Router+
-
What’s fixed
For all installers:
-
Improved the performance of the Provisioning step in the app.
-
Fixed an issue where installers were blocked for not completing the IQ Battery oversubscription step in systems with M Series Microinverters.
-
Improved app performance and implemented other bug fixes.
IQ Gateway software version 7.3.621 improves system stability.
-
Gateways supported: IQ Gateway, IQ Combiner 3/3C/3-ES/3C-ES/4/4C, IEEE 1547-2018 compliant IQ Gateway and IQ Combiner 4/4C, Envoy S Metered for North America, Envoy S Standard for North America, IQ Gateway Commercial, IQ Gateway M
-
Countries: U.S., Mexico, Canada, Brazil, Philippines
-
Microinverters supported: IQ8 Series, IQ7 Series, IQ6 Series, M Series, S Series
-
Supported system configurations:
-
Grid-tied Solar Only systems with M Series or S Series Microinverters, Envoy S Metered for North America or Envoy S Standard for North America
-
Grid-tied Solar Only systems with IQ6 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C
-
Grid-tied Solar Only systems with IQ7 Series or IQ8 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C
-
Grid-tied Solar Only systems with IQ7AM Microinverters, IQ Gateway (residential) in Brazil and Mexico
-
Grid-tied Solar Only systems with IQ7AM Microinverters, Envoy S Metered EM in Brazil and Philippines (230 V, 60 Hz systems only)
-
Grid-tied Solar Only systems with IQ7 Series Microinverters, IQ Commercial Gateway in Brazil and Philippines (230 V, 60 Hz systems only)
-
Grid-tied Solar Only systems with IQ7AM Microinverters, IQ Gateway Commercial in Brazil, Mexico, and Philippines (230 V, 60 Hz systems only)
-
Sunlight Backup systems with IQ8 Series Microinverters, IQ Gateway or IQ Combiner 4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, and IQ System Controller 2
-
Home Essentials Backup or Full Energy Independence systems with IQ6 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with IQ7 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with IQ8 Series Microinverters, IQ Gateway or IQ Combiner 4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, IQ System Controller 2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with M215 Series or M250 Series Microinverters, Envoy S Metered for North America, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
Note: The following features are supported only in specific configurations above:
Load Control, Generator Support, and solar circuit control (PV shedding) are supported in configurations 8 through 12.
Grid services are supported in configurations 9 through 12.
Release notes:
| # | Feature | Description |
|---|---|---|
| 1 | Bug Fixes and Feature Enhancements |
|
This release is being deployed via remote software upgrades for existing systems.
IQ Gateway software version 7.3.617 improves grid transition reliability, system stability, Zigbee communication, Wi-Fi communication, and the commissioning process.
-
Gateways supported: IQ Gateway, IQ Combiner 3/3C/3-ES/3C-ES/4/4C, IEEE 1547-2018 compliant IQ Gateway and IQ Combiner 4/4C, Envoy S Metered for North America, Envoy S Standard for North America, IQ Gateway Commercial, IQ Gateway M
-
Countries: U.S., Mexico, Canada, Brazil, Philippines
-
Microinverters supported: IQ8 Series, IQ7 Series, IQ6 Series, M Series, S Series
-
Supported system configurations:
-
Grid-tied Solar Only systems with M Series or S Series Microinverters, Envoy S Metered for North America or Envoy S Standard for North America
-
Grid-tied Solar Only systems with IQ6 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C
-
Grid-tied Solar Only systems with IQ7 Series or IQ8 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C
-
Grid-tied Solar Only systems with IQ7AM Microinverters and IQ Gateway (residential) in Brazil and Mexico
-
Grid Tied Solar Only systems with IQ7AM Microinverters and IQ Gateway M in Brazil and Philippines (230 V, 60 Hz systems only)
-
Grid Tied Solar Only systems with IQ7 Series Microinverters and IQ Commercial Gateway in Brazil and Philippines (230 V, 60 Hz systems only)
-
Grid Tied Solar Only systems with IQ7AM Microinverters and IQ Gateway Commercial in Brazil, Mexico, and Philippines (230 V, 60 Hz systems only)
-
Sunlight Backup systems with IQ8 Series Microinverters, IQ Gateway or IQ Combiner 4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, and IQ System Controller 2
-
Home Essentials Backup or Full Energy Independence systems with IQ6 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with IQ7 Series Microinverters, IQ Gateway or IQ Combiner 3/3C/3-ES/3C-ES/4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with IQ8 Series Microinverters, IQ Gateway or IQ Combiner 4/4C or IEEE 1547-2018 compliant IQ Gateway or IEEE 1547-2018 compliant IQ Combiner 4/4C, IQ System Controller 2, and IQ Battery 3/3T/10/10T
-
Home Essentials Backup or Full Energy Independence systems with M215 Series or M250 Series Microinverters, Envoy S Metered for North America, IQ System Controller 1/2, and IQ Battery 3/3T/10/10T
Note: The following features are supported only in these specific configurations above.
-
Load Control, Generator Support, and solar circuit control (PV shedding) are supported in configurations 8 through 12
-
Grid Services are supported in configurations 9 through 12
Release notes:
| # | Feature | Description |
|---|---|---|
| 1 | Improvements to system stability | 1. Improves the software commissioning update sequence for IQ Batteries by verifying multimode configuration parameter update status via events, and makes sure that during commissioning grid-forming configuration is set. This also disallows the installer from proceeding to functional validation before IQ Batteries are ready, thereby preventing a microgrid collapse and delays in commissioning. 2. Fixes an issue with automatic circuit phase detection for 208 V line-to-line split-phase 120-degree phase shift systems with IQ7 Microinverters. 3. Fixes an issue where grid transition failures happened during the following scenarios:
4. Fixes an issue of microgrid regulatory shutdown after islanding detected due to grid outage, by changing the IQ System Controller off-grid under voltage trip time from 100 ms to 300 ms. 5. Fixes an issue where High-Frequency Ride Through conditions cause microgrid collapse. |
| 2 | Enhancements to interface with the Enphase Cloud | 1. Supports faster retrieval of Wi-Fi SSIDs from the IQ Gateway to Enphase App using Message Queuing Telemetry Transport (MQTT) protocol over any active internet connection. This lets the homeowner connect to a Wi-Fi network faster and without connecting to the gateway’s local Access Point (AP) mode. 2. Supports automatic AP mode activation whenever an IQ Gateway loses its internet connection. This allows the homeowner to configure the alternate Wi-Fi network via AP mode in the absence of an internet connection, and without pressing the physical AP mode button on the IQ Gateway. 3. Supports setting up the polling and reporting intervals for a system with cell modem connectivity, and prevents reset of interval values due to a change in IQ Gateway diagnostic mode. 4. Improves handling of sending performance reports at regular intervals without any loss of any performance report. 5. Supports REST APIs for enabling and disabling the MID open detection and PV Breaker open detection logics using micro-DMIR change. |
| 3 | Improvements to IQ Battery behavior | 1. Improves system Sunlight Jump Start response time. 2. Prevents grid transition failure due to IQ Battery microinverters slow ramp, triggered by momentary cessation, kicked in just before anti-islanding detection. 3. Supports enabling and disabling Permission To Operate (PTO) for IQ Batteries on site from the Enphase Installer Portal. The feature prevents IQ Batteries from discharging to load or grid until the permission is enabled, and ensures IQ Batteries are able to maintain a healthy State of Charge (SoC). The status of the IQ Battery function is indicated in Enphase Installer Portal as a stateful event whenever the IQ Battery function is disabled. 4. Fixes an issue where an IQ Battery stops discharging to load when the peak hours overlap with must charge duration. 5. Improves the battery controller detection of microinverters in an IQ Battery by checking the operational state of microinverters. 6. Fixes an issue where the power from IQ Batteries was not being used to support the load when aggregate SoC is greater than reserved SoC. 7. Fixes an issue where the aggregate SoC drops in M Series Microinverter systems when Full Backup mode is selected. 8.Prevents the periodic forced SoC calibration in the Battery Management Unit and maintains battery SoC at approximately 97% by sending a manual SoC calibration message to the BMU after checking cell voltages. |
| 4 | Improvements to the commissioning and software upgrading process | 1. Improves the software upgrade process by checking versions of all the microinverters in IQ Batteries and triggering automatic upgrade if any microinverter’s firmware version is different from other microinverters. 2. Fixes an issue where the Enphase Installer App was blocked and showing an error while an IQ Gateway software upgrade was in progress. 3. Fixes an issue where multiple firmware upgrade retries happen when the IQ Battery firmware is not updated. 4. Improves the commissioning experience via the Enphase Installer App by logging the upgrade flow in IQ Gateway, including status messages and error messages. 5. Fixes an issue where a software upgrade using the Enphase Installer App fails due to communication loss between the IQ Gateway and the Enphase Installer App. 6. Enhances inventory report with inclusion of the phase association information of each inverter. |
| 5 | Improvements to Zigbee and Wi-Fi communication | 1. Improves handling of unknown grid mode conditions by increasing the unknown grid mode expiry timer to 12 hours to ensure the IQ System Controller connects back to the grid. 2. Enhances the Zigbee communication loss recovery mechanism during failures. 3. Enhances MQTT client connection loss with MQTT broker recovery mechanism by refreshing the Domain Name System (DNS) cache. 4. Fixes an issue where Zigbee communication between the IQ System Controller and the IQ Battery becomes stuck after an IQ Gateway powers down. 5. Fixes an issue where the Zigbee dongle was undetected after a software upgrade. |
| 6 | Bug fixes and feature enhancements | 1. Fixes an issue where multiple retries were required to upgrade the software on IQ Batteries. 2. Fixes an issue where repeated battery BMU reset events were reported. 3. Fixes an issue where a generator relay toggles until off-grid to on-grid transition sequence is completed. 4. Fixes an issue where the update manager did not detect the existence of an update image after the software upgrade was interrupted. 5. Removes the repeated “Systems Ghz Comms Signal Low” events which occur after a software upgrade. |
This release is being deployed via remote software upgrades for existing systems.
Note: Enphase only deploys this software release to system configurations 1 to 7, as described above in the “Supported system configurations” section. Other configurations will be upgraded in a future software release.
IQ Gateway software version 7.0.86 introduces updated security measures, new product support and is the next major worldwide release version of IQ Gateway embedded software. To read more about how to access Envoy locally with enhanced security, visit our webpage here:
-
Platforms Supported: IQ Envoy, Envoy S Metered, Envoy S Standard
-
Geographies: Worldwide
-
Microinverters Supported : M-Series, S-Series, IQ6, IQ7, IQ8
| # | Feature | Description |
|---|---|---|
| 1 | Support for IQ8 Series Microinverters | IQ Gateway SW 7.0 supports IQ8 microinverters in North America in grid-tied applications |
| 2 | Enhanced Security | The security infrastructure for accessing IQ Gateways using local APIs has been upgraded. The system now uses a token-based authentication mechanism to allow access for local data instead of a username/password combination. Read more about the local data access security here |
| 3 | Enphase Cellmodem Support | The new Enphase Cellmodems CELLMODEM-M1-06-SP-05 and CELLMODEM-M1-06-AT-05 are now supported by IQ Gateway for plug-and-play install |
| 4 | IQ Battery and System Controller Support | IQ Gateway SW 7.0 makes your system easy-to-upgrade to incorporate IQ Battery storage and System Controller in future |
| 5 | Reporting Enhancements for Metering Data | IQ Gateway can now increase the reporting frequency to Enphase Cloud on-demand for live debugging of the system in case of system issues. This can reduce the time to fix a potential system issue. The PV system will now support live status and live vitals with this update |
| 6 | PCS Support | IQ Gateway 7.0 supports Power Control System (PCS) to avoid main panel upgrade when oversizing M-Series/IQ6/IQ7 PV inverters in North America for installations using an IQ System Controller. You can read more about this feature here |
| 7 | Bug Fixes and Feature Enhancements | IQ Gateway SW 7.0 fixes a few bugs and improves the stability of system features in the existing IQ Gateway SW release |